Prolongs the life of worn and glazed belts and prevents slipping.
Use on all types of drive belts including ' v ' and flat belting. Size.
Click here for more information...
Part of the Rocol Aerosol Flawfinder system. High sensitivity dye for detecting cracks and flaws under normal light. Use after the inspection area has been cleaned and any excess penetrant have been removed. Simply spray on a thin visual translucent film of developer, avoiding over application. Size.
Click here for more information...
Part of the Rocol Aerosol Flawfinder system. A fine white film which gives precise definition to the faults highlighted by the dye penetrant. Simple spray inspection area and allow at least 10 minutes contact time.
Click here for more information...
General Purpose Water Mix Cutting Fluid. Ultracut 250 Plus should be used between 20:1 and 40:1 dilutions depending on the severity of the operation, workpiece material and water hardness. 5 Litre.
Click here for more information...
General Purpose semi-synthetic water mix cutting fluid with a 40% oil content.
Suitable for light/medium operations on a wide range of ferrous and non-ferrous metals.
Provides a high level of corrosion protection and has a long and predictable sump life. Size.
Click here for more information...
With a fast acting formula, frees rusted or seized fittings. A must for the toolbox kit anyone working with metal fittings and components, pipe work or engines.
Click here for more information...
Rocol WD Spray is specially formulated to rapidly displace moisture and leave a protective corrosion resistant film.
It will also give light lubrication with good penetration properties.
Click here for more information...
A non-staining dry PTFE lubricant which gives a low friction, non-toxic, non-stick surface and reduces static.
Use on cams, slides, open bearings and chutes. Size.
Click here for more information...
ROCOL Sapphire Hi-Speed 2 is a tenacious grease developed for bearings running at high speed and where low noise is a priority.
Click here for more information...
Exceptional load carrying capabilities - contains molybdenum disulphide. For the lubrication of plain bearings and slides. Temperature rang -20? to 150?. NLGI No.2.
Click here for more information...
An anti-seize product which is designed to protect thread fasteners from seizure over prolonged periods of time, even in the most arduous conditions.
Click here for more information...
High temperature metal free anti-seize paste for use across a high range of temperatures and where low sulphur and chlorine levels are essential.
Particularly suited for use on stainless steel and nimonic fasteners.
Approved to Rolls Royce MSRR 4008
Temperature Range -40?c to +1000?c
Size.
Click here for more information...