Woodworking

Trend PT/235X60X30 Saw blade panel trim235mm x60Tx30mm PT/235X60X30

Trend Circular Saw Blade Panel Trim 235mm X60T X 30mm PT/235X60X30 Finish - Super fine Diameter - 235mm Teeth - 60 Bore - 30mm Kerf - 3.0mm Tooth form -
Click here for more information...

Trend Circular Saw Blade Trimming 200mm X 48T X 30mm TR/200X48

Trend Circular Saw Blade Trimming 200mm X 48T X 30mm TR/200X48X30 Finish - Medium/Fine Diameter - 200mm Teeth - 48 Bore - 30mm Kerf - 3.0mm Tooth form -
Click here for more information...

Trend CB38-316TC Counterbore 3/16 diameter x 3/8 DC/S CB38-316TC

Trend CB38-316TC Counterbore 3/16 diameter x 3/8 DC/S CB38-316TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only.
Click here for more information...

Trend 6200/8TC Adjustable countersink 5/8 inch diameter 6200/8TC

Trend 6200/8TC Adjustable countersink 5/8 inch diameter 6200/8TC They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only.
Click here for more information...

Trend Router Cutters Multi-Boring Dowel Drill 5mm Dia 4119/5L

Trend Router Cutters Multi-Boring Dowel Drill 5mm Dia 4119/5LTC D=5mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Multi-Boring Dowel Drill 15mm Dia 4109/15

Trend Router Cutters Multi-Boring Dowel Drill 15mm Dia 4109/15RTC D=15mm C=25mm Overall length=57mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Drill 6mm X 70mm Ol LH Pack Of 10 4119/6L

Trend Router Cutters Drill 6mm X 70mm Ol LH Pack Of 10 4119/6LTC/10 D=6mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend 53/83X12MMTC Shear router cutter 53/83X12MMTC

Trend 53/83X12MMTC Shear router cutter 53/83X12MMTC Tungsten Carbide Tipped.|Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish.|Ideal for grooving & trimming veneer finishes & laminated boards.|Down cut feature stops break out on top edge.
Click here for more information...

Trend Router Cutters Multi-Boring Hinge Sink Bit 20mm 1009/20

Trend Router Cutters Multi-Boring Hinge Sink Bit 20mm 1009/20LTC D=20mm OL=57mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Multi-Bore Hinge Sink Bit 28mm Dia 1209/28

Trend Router Cutters Multi-Bore Hinge Sink Bit 28mm Dia 1209/28TC D=28mm OL=57mm Shank Diameter=10mm
Click here for more information...

Trend 2/66LX1/2TC Pocket router cutter 8 mm diameter 2/66LX1/2TC

Trend 2/66LX1/2TC Pocket router cutter 8 mm diameter 2/66LX1/2TC A single flute cutters with extra long shanks. All the single flute tools have recessed shanks to allow deeper cutting. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage.
Click here for more information...

Trend 2/7X1/2TC Single flute router cutter 9.5 mm diameter 2/7X1/2TC

Trend 2/7X1/2TC Single flute router cutter 9.5 mm diameter 2/7X1/2TC Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass.
Click here for more information...

Trend 3/83MX1/2TC Two flute router cutter 12.7 mm diameter 3/83MX1/2TC

Trend 3/83MX1/2TC Two flute router cutter 12.7 mm diameter 3/83MX1/2TC Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. |Two flutes give a clean finish to cut edges.
Click here for more information...

Trend 3/83DX1/2TC Two flute router cutter 12.7 mm diameter 3/83DX1/2TC

Trend 3/83DX1/2TC Two Flute Router Cutter For Worktops 12.7 mm diameter 3/83DX1/2TC Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. |Two flutes give a clean finish to cut edges. |All cutters above and including 9.5mm diameter, have TCT plunge centre tips.|Ideal for cutting kitchen worktops.
Click here for more information...

Trend 4/50X1/2TC Two flute router cutter 19.1 mm diameter 4/50X1/2TC

Trend 4/50X1/2TC Two flute router cutter 19.1 mm diameter 4/50X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. |Two flutes give a clean finish to cut edges. |TCT plunge centre tip.
Click here for more information...

Trend 4/10X1/2TC Two flute router cutter 35 mm diameter 4/10X1/2TC

Trend 4/10X1/2TC Two flute router cutter 35 mm diameter 4/10X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. |Two flutes give a clean finish to cut edges. |TCT plunge centre tip.
Click here for more information...

Trend 8/21X1/4TC Bearing guided sunk bead router cutter 8/21X1/4TC

Trend 8/21X1/4TC Bearing guided sunk bead router cutter 8/21X1/4TC Cutters with guide bearing reduce setting up time for curved workpieces.
Click here for more information...

Trend 8/22X1/2TC Bearing guided sunk bead 8/22X1/2TC

Trend 8/22X1/2TC Bearing guided sunk bead 8/22X1/2TC Cutters with guide bearing reduce setting up time for curved workpieces.
Click here for more information...

Trend 46/09X1/2TC Profile router cutter 46/09X1/2TC

Trend 46/09X1/2TC Profile router cutter 46/09X1/2TC Profiler with shank mounted bearing guides.|For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimming. Refs.
Click here for more information...

Trend Router Cutters Thru Drill 10mm X 57mm olrh Pack Of 10 4507

D=12mm C=35mm Overall length=57mm Shank Diameter=10mm
Click here for more information...