Snickers Workwear Full Range Fast Deliveries
Trend IT/95600303 Dmaxdvf-adjustable score sawblade 120X20X2.8-3.6  IT/9560030

Trend IT/95600303 Dmaxdvf-adjustable score sawblade 120X20X2.8-3.6 IT/95600303


Trend IT/95600303 Dmaxdvf-adjustable score sawblade 120X20X2.8-3.6 IT/95600303 Alternate bevel adjustable scorer for scoring the underside of double-sided laminate boards (chipboard, MDF etc). Blade scores with feed and thickness is adjusted by adding or removing spacers.
Click here for more information...
£102.00 ex VAT
£122.40 inc VAT
Trend IT/90131756 Msd-trim and size thin kerf sawblade 250X2.3X80  IT/9013175

Trend IT/90131756 Msd-trim and size thin kerf sawblade 250X2.3X80 IT/90131756


Trend IT/90131756 Msd-trim and size thin kerf sawblade 250X2.3X80 IT/90131756 Triple chip sawblade for trimming and cross cutting with a medium/fine finish on single-sided laminated boards (chipboard, MDF etc). Thin kerf blades require less horsepower. Suitable for use on a table saw.
Click here for more information...
£81.00 ex VAT
£97.20 inc VAT
Trend IT/95004106 Dw-trim and size sawblade 250X30X3.2X60  IT/9500410

Trend IT/95004106 Dw-trim and size sawblade 250X30X3.2X60 IT/95004106


Trend IT/95004106 Dw-trim and size sawblade 250X30X3.2X60 IT/95004106 Alternate bevel sawblade for trimming and cross cutting with a fine finish on solid soft woods, hard woods and man-made veneered boards. Revolutionary new production process give blade a much higher durability. Suitable for use on a table saw.
Click here for more information...
£78.50 ex VAT
£94.20 inc VAT
Trend IT/90131706 Mwd-trim and crosscut thin kerf 300X30X96  IT/9013170

Trend IT/90131706 Mwd-trim and crosscut thin kerf 300X30X96 IT/90131706


Trend IT/90131706 Mwd-trim and crosscut thin kerf 300X30X96 IT/90131706 Alternate bevel sawblade for trimming and cross cutting with a fine finish on soft woods, hard woods and man-made boards. Thin kerf blades require less horsepower and produce less waste on expensive woods. Suitable for use on a table saw.
Click here for more information...
£89.00 ex VAT
£106.80 inc VAT
Trend IT/90104856 Ms-trim and sizing sawblade 300X30X3.2X60 IT/9010485

Trend IT/90104856 Ms-trim and sizing sawblade 300X30X3.2X60 IT/90104856


Trend IT/90104856 Ms-trim and sizing sawblade 300X30X3.2X60 IT/90104856 Triple chip sawblade for trimming and cross cutting with a medium/fine finish on single sided laminated boards (chipboard, MDF etc). Used in combination with a scoring blade for fine finish on double-sided laminated boards. Suitable for use on a table saw.
Click here for more information...
£75.50 ex VAT
£90.60 inc VAT
Trend IT/94005806 Mwq - trimming and sizing sawblade 300X30X100 IT/9400580

Trend IT/94005806 Mwq - trimming and sizing sawblade 300X30X100 IT/94005806


Trend IT/94005806 Mwq - trimming and sizing sawblade 300X30X100 IT/94005806 Alternate bevel sawblade for trimming and cross cutting with a fine finish on solid soft woods, hard woods and man-made veneered boards. Special sound dampening slots reduce the noise made by the sawblade during use. Suitable for use on a table saw.
Click here for more information...
£116.50 ex VAT
£139.80 inc VAT
Trend IT/95511056 Dmax dwt-panel size sawblade 305X30X4.4X60  IT/9551105

Trend IT/95511056 Dmax dwt-panel size sawblade 305X30X4.4X60 IT/95511056


Trend IT/95511056 Dmax dwt-panel size sawblade 305X30X4.4X60 IT/95511056 Alternate bevel sawblade for sizing single or stacked boards (chipboard, MDF etc), without coating. Used in combination with a conical scorer. Revolutionary new production process gives blade a much higher durability.
Click here for more information...
£116.50 ex VAT
£139.80 inc VAT
Trend IT/90101806 Mw-rip & cross cut sawblade 350X30X42 IT/9010180

Trend IT/90101806 Mw-rip & cross cut sawblade 350X30X42 IT/90101806


Trend IT/90101806 Mw-rip & cross cut sawblade 350X30X42 IT/90101806 Alternate bevel sawblade for rip and cross cutting with a coarse/medium finish on solid soft and hard woods. Suitable for use on a table saw.
Click here for more information...
£66.50 ex VAT
£79.80 inc VAT
Trend IT/90106306 Ms-trim and sizing sawblade 350X30X3.5X108  IT/9010630

Trend IT/90106306 Ms-trim and sizing sawblade 350X30X3.5X108 IT/90106306


Trend IT/90106306 Ms-trim and sizing sawblade 350X30X3.5X108 IT/90106306 Triple chip sawblade for trimming and cross cutting with a medium/fine finish on single sided laminated boards (chipboard, MDF etc). Used in combination with a scoring blade for fine finish on double-sided laminated boards. Suitable for use on a table saw.
Click here for more information...
£115.50 ex VAT
£138.60 inc VAT
Trend IT/90101906 Mw-rip & cross cut sawblade 400X30X48 IT/9010190

Trend IT/90101906 Mw-rip & cross cut sawblade 400X30X48 IT/90101906


Trend IT/90101906 Mw-rip & cross cut sawblade 400X30X48 IT/90101906 Alternate bevel sawblade for rip and cross cutting with a coarse/medium finish on solid soft and hard woods. Suitable for use on a table saw.
Click here for more information...
£74.50 ex VAT
£89.40 inc VAT
Trend 3/6X1/4HSS Two flute router cutter 10 mm diameter 3/6X1/4HS

Trend 3/6X1/4HSS Two flute router cutter 10 mm diameter 3/6X1/4HSS


Trend 3/6X1/4HSS Two flute router cutter 10 mm diameter 3/6X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...
£8.63 ex VAT
£10.35 inc VAT
Trend 2/3X1/4HSS Single flute router cutter 4 mm diameter 2/3X1/4HS

Trend 2/3X1/4HSS Single flute router cutter 4 mm diameter 2/3X1/4HSS


Trend 2/3X1/4HSS Single flute router cutter 4 mm diameter 2/3X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...
£5.63 ex VAT
£6.75 inc VAT
Trend 55/3X8MMHSS Aluminium router cutter 12.7 mm diameter 55/3X8MMHS

Trend 55/3X8MMHSS Aluminium router cutter 12.7 mm diameter 55/3X8MMHSS


Trend 55/3X8MMHSS Aluminium router cutter 12.7 mm diameter 55/3X8MMHSS Cutter are designed to plunge and machine or mill lateral slots. |All aluminium tooling should be used with a coolant, wax stick or lubricant.
Click here for more information...
£11.63 ex VAT
£13.95 inc VAT
Trend Router Cutters Cutter Trimmer 12.7mm T Cut    C113   C113

Trend Router Cutters Cutter Trimmer 12.7mm T Cut C113 C113X


Used for trimming plastic or plywood overlays.|Also for copy profiling with a template.|Raise cutter in stages to spread wear of cutting edges.
Click here for more information...
£9.79 ex VAT
£11.74 inc VAT
Trend C153X1/2TC Two flute router cutter 12.7mm diameter C153X1/2T

Trend C153X1/2TC Two flute router cutter 12.7mm diameter C153X1/2TC


Trend C153X1/2TC Two Flute Router Cutter For Worktops 12.7mm diameter C153X1/2TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Ideal For WorktopsUse on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...
£9.75 ex VAT
£11.70 inc VAT
Trend C012X1/2TC Two flute router cutter 7.9mm diameter C012X1/2T

Trend C012X1/2TC Two flute router cutter 7.9mm diameter C012X1/2TC


Trend C012X1/2TC Two flute router cutter 7.9mm diameter C012X1/2TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...
£7.13 ex VAT
£8.55 inc VAT
Trend C021X8MMTC Two flute router cutter 12.7mm diameter C021X8MMT

Trend C021X8MMTC Two flute router cutter 12.7mm diameter C021X8MMTC


Trend C021X8MMTC Two flute router cutter 12.7mm diameter C021X8MMTC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...
£9.00 ex VAT
£10.80 inc VAT
Trend C023X1/4TC Two flute router cutter 14.3mm diameter C023X1/4T

Trend C023X1/4TC Two flute router cutter 14.3mm diameter C023X1/4TC


Trend C023X1/4TC Two flute router cutter 14.3mm diameter C023X1/4TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...
£9.75 ex VAT
£11.70 inc VAT
Trend C004X8MMTC Two flute router cutter 5mm diameter C004X8MMT

Trend C004X8MMTC Two flute router cutter 5mm diameter C004X8MMTC


Trend C004X8MMTC Two flute router cutter 5mm diameter C004X8MMTC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...
£5.63 ex VAT
£6.75 inc VAT
Trend C035X1/4TC One flute 4mm diameter x 11.1mm cut  C035X1/4T

Trend C035X1/4TC One flute 4mm diameter x 11.1mm cut C035X1/4TC


Trend C035X1/4TC One flute 4mm diameter x 11.1mm cut C035X1/4TC Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exceed cutter diameter.
Click here for more information...
£7.13 ex VAT
£8.55 inc VAT
Pages: 1 2 (3) 4 5 6 7 8