Woodworking

Trend Router Cutters Cutter Cut 8 140X 30 IT/70

Trend IT/7050901 router cutter C 8 140X30 IT/7050901 Hard wearing steel body complete with tungsten carbide knives. Three piece set suitable for rounding over or chamfering various thicknesses of softwood, hardwood and man-made boards on a spindle moulder. Cutting width can be adjusted by using supplied spacer rings.
Click here for more information...

Trend IT/7526501 Concave profile set IT/7526501

Trend IT/7526501 Concave profile set IT/7526501 Cutterhead body in hard wearing aluminium complete with disposable tungsten carbide knives. Suitable for producing various radii beads in softwood, hardwood and man-made boards on a spindle moulder.
Click here for more information...

Trend Router Cutters Raised Panel Profile 1 156X17X 31.8 IT/742

Trend IT/7420277 Raised panel profile 1 156X17X31.8 IT/7420277 Disposable tungsten carbide knives. Suitable for producing various raised panel profiles in softwood, hardwood and man-made boards on a spindle moulder.
Click here for more information...

Trend IT/7520121 Left router cutter 113X16X30 IT/7520121

Trend IT/7520121 Left router cutter 113X16X30 IT/7520121 Left cutter to suit the adjustable rounding & chamfering cutter block.
Click here for more information...

Trend Router Cutters Knife 40mm X 4mm TCT (Hw) (Pr) IT/3308

Trend IT/3308442 Knife 40mm x 4mm TCT (Hw) (pair) IT/3308442 Replacement knife.
Click here for more information...

Trend Router Cutters TCT Cutter Blade 12.0 X 7.5 X 1.5 Ten Pack

Trend IT/3107512/10 TC blade 12.0 x 7.5 x 1.5 ten Pack IT/3107512/10 Replacement pack of ten T.C. blades.
Click here for more information...

Trend Router Cutters TCT Cutter Blade 12.0 X 7.5 X 1.5

Trend Router Cutters TCT Cutter Blade 12.0 X 7.5 X 1.5 IT/3107512 Replacement T.C blade.
Click here for more information...

Trend Router Cutters Straight Cutter 100X 50X 30 IT/73

Trend IT/7320041 Straight router cutter 100 degrees IT/7320041 Straight cutter to suit the adjustable rounding & chamfering cutter block.
Click here for more information...

Trend Router Cutters Spacer 70X0.1X 30 IT/192

Trend IT/1926901 Spacer IT/1926901 High quality, fully ground, steel spacer ring with pin holes. For use with our adjustable grooving cutterheads or can be used with standard groovers for comb jointing.
Click here for more information...

Trend Router Cutters TorX Screw 5.30 M4 CSK IT/1930

Trend IT/1930310 Torx screw 5.30 M4 countersink IT/1930310 Replacement M4 Torx screw.
Click here for more information...

Trend 50/19X1/4HSSE Helical plunge router cutter 5 mm diameter 50/19X1/4HSSE

Trend 50/19X1/4HSSE Helical plunge router cutter 5 mm diameter 50/19X1/4HSSE Cutter are designed to plunge and machine or mill lateral slots. |All aluminium tooling should be used with a coolant, wax stick or lubricant.
Click here for more information...

Trend ROT12/38HSS Surface mill router cutter 12 mm diameter ROT12/38HSS

Trend ROT12/38HSS Surface mill router cutter 12 mm diameter ROT12/38HSS Cutter are designed to plunge and machine or mill lateral slots. |All aluminium tooling should be used with a coolant, wax stick or lubricant. |Material should be securely clamped.|Straight Rotox cutters with M10 X 1.5mm internal thread, for uPVC plastics and aluminium.
Click here for more information...

Trend 2/6X1/4HSS Single flute router cutter 6.3 mm diameter 2/6X1/4HSS

Trend 2/6X1/4HSS Single flute router cutter 6.3 mm diameter 2/6X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 12/6X8MMHSS Radius router cutter 6.3mm radius 12/6X8MMHSS

Trend 12/6X8MMHSS Radius router cutter 6.3mm radius 12/6X8MMHSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend Router Cutters Brookman A=100* X 9/16 Dia F40HSS

BRookman cutter with a threaded shank, 3/8 B.S.F.
Click here for more information...

Trend C168X1/4TC Guided trimmer 6.35mm diameter x 25.4mm C168X1/4TC

Trend C168X1/4TC Guided trimmer 6.35mm diameter x 25.4mm C168X1/4TC Used for trimming plastic or plywood overlays.|Also for copy profiling with a template.
Click here for more information...

Trend C153DX12MMTC Two flute router cutter 12.7mm diameter C153DX12MMTC

Trend C153DX12MMTC Two Flute Router Cutter For Worktops 12.7mm diameter C153DX12MMTC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Ideal For Worktops, Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...

Trend C016AX1/2TC Two flute router cutter 10mm diameter C016AX1/2TC

Trend C016AX1/2TC Two flute router cutter 10mm diameter C016AX1/2TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...

Trend C026X1/4TC Two flute router cutter 15.9mm diameter C026X1/4TC

Trend C026X1/4TC Two flute router cutter 15.9mm diameter C026X1/4TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...

Trend C020X8MMTC Two flute router cutter 12.7mm diameter C020X8MMTC

Trend C020X8MMTC Two flute router cutter 12.7mm diameter C020X8MMTC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...