Snickers Workwear Full Range Fast Deliveries
Trend 6033 Collet 1/4 Makita 3600B-01B  603

Trend 6033 Collet 1/4 Makita 3600B-01B 6033


Trend Collet Deg Makita 3600B-01B ¼” inch collet capacity.
Click here for more information...
£8.50 ex VAT
£10.20 inc VAT
Trend CLT/SLV/68 Collet sleeve CLT/SLV/6

Trend CLT/SLV/68 Collet sleeve CLT/SLV/68


Trend Collet Sleeve 6mm To 8mm CLT/SLV/68 Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Click here for more information...
£6.00 ex VAT
£7.20 inc VAT
Trend PDW502763MM Collet 1/4 Power Devil Pdw5027  PDW502763M

Trend PDW502763MM Collet 1/4 Power Devil Pdw5027 PDW502763MM


Trend Collet Deg Power Devil PDW5027 Shank Diameter=6.35 To suit the Power Devil
Click here for more information...
£5.00 ex VAT
£6.00 inc VAT
Trend 50413012 Collet 3/8 inch Ryobi R500  5041301

Trend 50413012 Collet 3/8 inch Ryobi R500 50413012


Trend 50413012 Collet 3/8 inch Ryobi R500 50413012 Replacement collet.|Does not include the collet nut.|To fit the following machines:-Ryobi R500, R502, RE600N, R600N,RE601 Trend General Title Ryobi Specification For Trend 50413012 Trend Router Cutter Shank Diameter Inch Route Cutter Diameter D mm Router Cutter Diameter 2 D mm Router Cutter
Click here for more information...
£8.50 ex VAT
£10.20 inc VAT
Trend 31567 Collet for Metabo Ind 8mm  3156

Trend 31567 Collet for Metabo Ind 8mm 31567


Trend 31567 Collet for Metabo Ind 8mm 31567 Replacement collet.|Does not include the collet nut.|To fit the following machines:-|Metabo OF1612, OFE1812|Felisatti TP246(E), R346EC Trend General Title Metabo Specification For Trend 31567 Trend Router Cutter Shank Diameter Inch Route Cutter Diameter D mm Router Cutter Diameter 2 D mm Router
Click here for more information...
£26.50 ex VAT
£31.80 inc VAT
Trend 302193 Collet 8mm for Hitachi M8(V)  30219

Trend 302193 Collet 8mm for Hitachi M8(V) 302193


Trend 302193 Collet 8mm for Hitachi M8(V) 302193 Replacement collet.|Does not include the collet nut.|To fit the following machines:-Hitachi M8, M8V Trend General Title Hitachi Specification For Trend 302193 Trend Router Cutter Shank Diameter Inch Route Cutter Diameter 8 D mm Router Cutter Diameter 2 D mm Router Cutter Length mm Router
Click here for more information...
£45.00 ex VAT
£54.00 inc VAT
Trend CSB/CC30524 Craft saw blade crosscut 305mm x 24T x 30mm  CSB/CC3052

Trend CSB/CC30524 Craft saw blade crosscut 305mm x 24T x 30mm CSB/CC30524


Trend Craft Circular Saw Blade TCT 305mm X 24T X 30mm CSB/CC30524 Suitable for softwood, hardwood, particle board, plywood veneered on both sides, particle board with plastic laminate on one side.
Click here for more information...
£25.88 ex VAT
£31.05 inc VAT
Trend AP/190X60X30 Saw blade alloy or plastic 190mm x60Tx30mm  AP/190X60X3

Trend AP/190X60X30 Saw blade alloy or plastic 190mm x60Tx30mm AP/190X60X30


Trend Circular Saw Blade Alloy Or Plastic 190mm X 60T X 30mm AP/190X60X30 Finish - Fine Diameter - 190mm Teeth - 60 Bore - 30mm Kerf - 2.8mm Plate thickness - 1.8mm Tooth form -
Click here for more information...
£60.38 ex VAT
£72.45 inc VAT
Trend Circular Saw Blade Combination 170mm X 24T X 30mm      CM

Trend Circular Saw Blade Combination 170mm X 24T X 30mm CM/


Trend Circular Saw Blade Combination 170mm X 24T X 30mm CM/170X24X30 Finish - Medium Diameter - 170mm Teeth - 24 Bore - 30mm Kerf - 2.8mm Tooth Form -
Click here for more information...
£30.21 ex VAT
£36.26 inc VAT
Trend CC/250X42X30 Saw blade crosscut 250mm x42Tx30mm  CC/250X42X3

Trend CC/250X42X30 Saw blade crosscut 250mm x42Tx30mm CC/250X42X30


Trend Circular Saw Blade Crosscut 250mm X 42T X 30mm CC/250X42X30 Finish - Medium Diameter - 250mm Teeth - 42 Bore - 30mm Kerf - 3.2mm Tooth Form -
Click here for more information...
£65.63 ex VAT
£78.75 inc VAT
Trend Circular Saw Blade Fine Trim 250mm X 80T X 30mm  FT/250X8

Trend Circular Saw Blade Fine Trim 250mm X 80T X 30mm FT/250X80


Trend Circular Saw Blade Fine Trim 250mm X 80T X 30mm FT/250X80X30 Finish - Extra fine Diameter - 250mm Teeth - 80 Bore - 30mm Kerf - 3.2mm Tooth form -
Click here for more information...
£70.13 ex VAT
£84.15 inc VAT
Trend PT/184X58X16 Saw blade panel trim184mm x58Tx16mm  PT/184X58X1

Trend PT/184X58X16 Saw blade panel trim184mm x58Tx16mm PT/184X58X16


Trend Circular Saw Blade Panel Trim 184mm X 58T X 16mm PT/184X58X16 Finish - Super fine Diameter - 184mm Teeth - 58 Bore - 16mm Kerf - 2.8mm Tooth form -
Click here for more information...
£55.13 ex VAT
£66.15 inc VAT
Trend Circular Saw Blade Trimming 160mm X 36T X 20mm   TR/160X3

Trend Circular Saw Blade Trimming 160mm X 36T X 20mm TR/160X36


Trend Circular Saw Blade Trimming 160mm X 36T X 20mm TR/160X36X20 Finish - Medium/Fine Diameter - 160mm Teeth - 36 Bore - 20mm Kerf - 2.6mm Tooth form -
Click here for more information...
£34.50 ex VAT
£41.40 inc VAT
Trend Snappy Nutdriver 7mm A/F MagnetiCut  SNAP/ND/7

Trend Snappy Nutdriver 7mm A/F MagnetiCut SNAP/ND/7M


Trend Snappy Nutdriver 7mm A/F MagnetiCut SNAP/ND/7M Ideal for bolts.
Click here for more information...
£6.18 ex VAT
£7.41 inc VAT
Trend Snappy TCutD/CSK 5/64 Drill          SNAP/CS/4T

Trend Snappy TCutD/CSK 5/64 Drill SNAP/CS/4TC


Trend Snappy TCutD/CSK 5/64 Drill SNAP/CS/4TC Tungsten Carbide tipped version of the popular Snappy drill countersink.|This tool can be used in abrasive materials such as laminated chipboard.|The drills produce pilot holes only. D=9.5mm d=2.0mm (5/64 inch) Screw size (S/W=n.a) (H/W)=No.
Click here for more information...
£8.55 ex VAT
£10.26 inc VAT
Trend Snappy PHillips No 1 Bit 150mm Ol   SNAP/PH/1

Trend Snappy PHillips No 1 Bit 150mm Ol SNAP/PH/1A


Trend Snappy PHillips No 1 Bit 150mm Ol SNAP/PH/1A Extra long PHillips screwdriver bits For use with Snappy Quick Chuck.
Click here for more information...
£5.23 ex VAT
£6.27 inc VAT
Trend Snappy 25mm Bit PHillips 1 Ten Tin  SNAP/Iph1/1

Trend Snappy 25mm Bit PHillips 1 Ten Tin SNAP/Iph1/10


Trend Snappy 25mm Bit PHillips 1 Ten Tin SNAP/Iph1/10 A pack of ten 25mm No. 1 PHillips 25mm insert bits Titanium nitride coating (TiN) coated.|They have a round shaft to reduce breakage giving excellent torque transmission, high resistance to Cam-Out (coming out of screw head)and extended life time.
Click here for more information...
£5.23 ex VAT
£6.27 inc VAT
Trend Snappy Quick Chuck Yankee Shk Large SNAP/Qcy

Trend Snappy Quick Chuck Yankee Shk Large SNAP/Qcyl


Trend Snappy Quick Chuck Yankee Shk Large SNAP/Qcyl The Snappy system starts with the Quick Chuck.|Six flats on the shank ensure precise location in the chuck.|A sprung loaded outer sleeve makes it easy to remove attachments.|This chuck is suitable for use in 5/16 inch Yankee Ratchet screwdrivers.
Click here for more information...
£11.88 ex VAT
£14.25 inc VAT
Trend Snappy Wire Brush End 20mm Steel    SNAP/Wb/E20

Trend Snappy Wire Brush End 20mm Steel SNAP/Wb/E20S


With ¼”" hex shank allows rapid tool change. The 0.3mm steel brush tackles a wide range of abrasive jobs.
Click here for more information...
£3.33 ex VAT
£3.99 inc VAT
Trend Snappy SNAP/MAG magnetic holder for Screw

Trend Snappy SNAP/MAG magnetic holder for Screws


Trend Snappy SNAP/MAG magnetic holder for Screws Designed to hold longer screws securely onto the screwdriver bit with an extra magnetic ring. Accepts 25 mm insert bits and has an adjustable barrel.
Click here for more information...
£7.98 ex VAT
£9.58 inc VAT
Pages: 1 2 3 4 (5) 6 7 8 9 10