Drilling Tools

Trend CB12-316HSS Counterbore 3/16 diameter x 1/2 DC/S CB12-316HSS

Trend CB12-316HSS Counterbore 3/16 diameter x 1/2 DC/S CB12-316HSS The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals.
Click here for more information...

Trend 6200/12HSS Adjustable countersink 5/8 inch diameter 6200/12HSS

Trend 6200/12HSS Adjustable countersink 5/8 inch diameter 6200/12HSS They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds only. Not suitable for ferrous or non ferrous metals.
Click here for more information...

Trend 4001/11HSS Dowel drill 11mm diameter x 87mm 4001/11HSS

Trend 4001/11HSS Dowel drill 11mm diameter x 87mm 4001/11HSS These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board.
Click here for more information...

Trend 1306/78WS Saw forstner 7/8 inch diameter 1306/78WS

Trend 1306/78WS Saw forstner 7/8 inch diameter 1306/78WS Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and acolloping operations.
Click here for more information...

Trend 2214/12WS Plug maker match 1/2 inch diameter 2214/12WS

Trend 2214/12WS Plug maker match 1/2 inch diameter 2214/12WS Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.|These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to bed of drilling machine.
Click here for more information...

Trend 620/5WS Countersink 5mm diameter 620/5WS

Trend 620/5WS Countersink 5mm diameter 620/5WS These countersinks, produced from the best grade carbon steel, leaves a clean cut finish by virtue of their multi-tooth deep ground gullets.|Fits metric drills from 3mm to 12mm inclusive.|Not suitable for abrasive materials or metal. Drill bit not included.
Click here for more information...

Trend 501/38HSS Twist drill 3/8 inch x 9.5mm diameter 501/38HSS

Trend 501/38HSS Twist drill 3/8 inch x 9.5mm diameter 501/38HSS Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work.
Click here for more information...

Trend CB1-38TC Counterbore 3/8 diameter x 1 DC/S CB1-38TC

Trend CB1-38TC Counterbore 3/8 diameter x 1 DC/S CB1-38TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only.
Click here for more information...

Trend 4001/55TC Dowel drill 5.5mm diameter x 38mm 4001/55TC

Trend 4001/55TC Dowel drill 5.5mm diameter x 38mm 4001/55TC These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board. Have tapered spurs.
Click here for more information...

Trend Router Cutters Multi-Boring Dowel Drill 12mm Dia 4109/12

Trend Router Cutters Multi-Boring Dowel Drill 12mm Dia 4109/12RTC D=12mm C=25mm Overall length=57mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Drill 6mm X 57mm Ol RH Pack Of 10 4109/6R

Trend Router Cutters Drill 6mm X 57mm Ol RH Pack Of 10 4109/6RTC/10 D=6mm C=25mm Overall length=57mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Drill 12mm X 70mm Ol RH Pack Of 10 4119/12

Trend Router Cutters Drill 12mm X 70mm Ol RH Pack Of 10 4119/12RTC/1 D=12mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend 1004/17TC Lip and spur two wing bit 17mm diameter 1004/17TC

Trend 1004/17TC Lip and spur two wing bit 17mm diameter 1004/17TC These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole.
Click here for more information...

Trend Router Cutters Multi-Bore Hinge Sink Bit 25mm Dia 1209/25

Trend Router Cutters Multi-Bore Hinge Sink Bit 25mm Dia 1209/25TC D=25mm OL=57mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Multi-Boring Hinge Sink Bit 35mm 1009/35

Trend Router Cutters Multi-Boring Hinge Sink Bit 35mm 1009/35TC D=35mm OL=57mm Shank Diameter=10mm
Click here for more information...

Trend 1013/60TC Lip and spur two wing bit 60mm diameter 1013/60TC

Trend 1013/60TC Lip and spur two wing bit 60mm diameter 1013/60TC These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole.
Click here for more information...

Trend 501/716TC Twist drill 7/16 inch diameter 501/716TC

Trend 501/716TC Twist drill 7/16 inch diameter 501/716TC Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Have a Solid Carbide ends, brazed in and ground to give maximum clearance. Have a 60 degree taper point and are recommended for hard or abrasive materials.
Click here for more information...

Trend Machinery C-Bore 7/32 Dia X 12mm C/B Dia

Drills holes and counterbore parallel holes over long periods in abrasive material.|Designed to receive plug produced by plug maker Ref.
Click here for more information...

Trend Router Cutters Hinge Sinking 35mm Dia

This machine bit is typically used by kitchen furniture manufacturers for recessing circular hinges.|Inexpensive hinge sinker is best suited for laminate covered boards.|Use at speed range 2000 Ð12000RPM to avoid burning.|Use with pillar drills only.| D=35mm Overall length=45mm Shank Diameter=¼” inch
Click here for more information...

Trend 104/30X3/8TC Hinge sinking 30mm diameter 104/30X3/8TC

Trend 104/30X3/8TC Hinge sinking 30mm diameter 104/30X3/8TC These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes.|Use with pillar drills only.
Click here for more information...