Professional TC Cutters

Trend CB38-316TC Counterbore 3/16 diameter x 3/8 DC/S CB38-316TC

Trend CB38-316TC Counterbore 3/16 diameter x 3/8 DC/S CB38-316TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only.
Click here for more information...

Trend CB12-316TC Counterbore 3/16 diameter x 1/2 DC/S CB12-316TC

Trend CB12-316TC Counterbore 3/16 diameter x 1/2 DC/S CB12-316TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only.
Click here for more information...

Trend 6200/8TC Adjustable countersink 5/8 inch diameter 6200/8TC

Trend 6200/8TC Adjustable countersink 5/8 inch diameter 6200/8TC They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only.
Click here for more information...

Trend 6200/10TC Adjustable countersink 5/8 inch diameter 6200/10TC

Trend 6200/10TC Adjustable countersink 5/8 inch diameter 6200/10TC They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only.
Click here for more information...

Trend Router Cutters Multi-Boring Dowel Drill 5mm Dia 4119/5L

Trend Router Cutters Multi-Boring Dowel Drill 5mm Dia 4119/5LTC D=5mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Multi-Boring Dowel Drill 5mm Dia 4119/5T

Trend Router Cutters Multi-Boring Dowel Drill 5mm Dia 4119/5TC D=5mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Multi-Boring Dowel Drill 15mm Dia 4109/15

Trend Router Cutters Multi-Boring Dowel Drill 15mm Dia 4109/15RTC D=15mm C=25mm Overall length=57mm Shank Diameter=10mm
Click here for more information...

Trend 4001/9TC Dowel drill 9mm diameter x 80mm 4001/9TC

Trend 4001/9TC Dowel drill 9mm diameter x 80mm 4001/9TC These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board. Have tapered spurs.
Click here for more information...

Trend Router Cutters Drill 6mm X 70mm Ol LH Pack Of 10 4119/6L

Trend Router Cutters Drill 6mm X 70mm Ol LH Pack Of 10 4119/6LTC/10 D=6mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Drill 9.5mm X 57mm Ol RH Pack Of 10 4109/95

Trend Router Cutters Drill 9.5mm X 57mm Ol RH Pack Of 10 4109/95RTC/1 D=9.5mm C=25mm Overall length=57mm Shank Diameter=10mm
Click here for more information...

Trend 1004/10TC Lip and spur two wing bit 10mm diameter 1004/10TC

Trend 1004/10TC Lip and spur two wing bit 10mm diameter 1004/10TC These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole.
Click here for more information...

Trend Router Cutters Multi Borer 15mm Dia X 57mm Ol 1009/15

Trend Router Cutters Multi Borer 15mm Dia X 57mm Ol 1009/15LTC D=15mm OL=57mm Shank Diameter=10mm
Click here for more information...

Trend 1004/18TC Lip and spur two wing bit 18mm diameter 1004/18TC

Trend 1004/18TC Lip and spur two wing bit 18mm diameter 1004/18TC These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole.
Click here for more information...

Trend Router Cutters Multi-Boring Hinge Sink Bit 28mm 1009/28

Trend Router Cutters Multi-Boring Hinge Sink Bit 28mm 1009/28TC D=28mm OL=57mm Shank Diameter=10mm
Click here for more information...

Trend 1004/31TC Lip and spur two wing bit 31mm diameter 1004/31TC

Trend 1004/31TC Lip and spur two wing bit 31mm diameter 1004/31TC These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole.
Click here for more information...

Trend 501/732TC Twist drill 7/32 inch diameter 501/732TC

Trend 501/732TC Twist drill 7/32 inch diameter 501/732TC Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Have a Solid Carbide ends, brazed in and ground to give maximum clearance. Have a 60 degree taper point and are recommended for hard or abrasive materials.
Click here for more information...

Trend Machinery Dowel Drill 3/16 Dia X 35mm DL

This slow spiral TCT drill can be used in drilling machines or plunge routers.|Use between 1000 and 22000 RPM.
Click here for more information...

Trend 105/35X1/2TC Router machine bit 105/35X1/2TC

Trend 105/35X1/2TC Router machine bit 105/35X1/2TC These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used.
Click here for more information...

Trend 104/26X3/8TC Hinge sinking 26mm diameter 104/26X3/8TC

Trend 104/26X3/8TC Hinge sinking 26mm diameter 104/26X3/8TC These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes.|Use with pillar drills only.
Click here for more information...

Trend 4001/475HSS Dowel drill 4.75mm diameter x 50mm 4001/475HSS

Trend 4001/475HSS Dowel drill 4.75mm diameter x 50mm 4001/475HSS These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board.
Click here for more information...