Snickers Workwear Full Range Fast Deliveries
Trend CCC/KIT router cutter and collet Care kit  CCC/KI

Trend CCC/KIT router cutter and collet Care kit CCC/KIT


Trend Machinery Cutter & Collet Care Kit CCC/KIT INCLUDES: A DMT mini-diamond sharpening stone and water bottle. Rust Buster anti-corrosion agent spray. Four sizes of brass brushes for cleaning collets.
Click here for more information...
£18.53 ex VAT
£22.23 inc VAT
Trend BEAM/005 Beam trammel BEAM/00

Trend BEAM/005 Beam trammel BEAM/005


Trend Machinery Beam Trammel Attachment 8mm Rod T5 Beam/005 The beam trammel is connected to one of the side-fence rods and has an adjustable pin with a point.|IT enables the T5 to be guided precisely to cut circles or arcs.| For use with 8mm
Click here for more information...
£6.00 ex VAT
£7.20 inc VAT
Trend CB/KIT Collet brush kit 4 brush Sizes  CB/KI

Trend CB/KIT Collet brush kit 4 brush Sizes CB/KIT


Trend Collet Brush Kit 4 Brush Sizes CB/KIT Four brushes, used to remove deposits of resin, dust and corrosion from the inside of collets.|Made from brass to prevent score damage.
Click here for more information...
£4.00 ex VAT
£4.80 inc VAT
Trend CLT/SLV/363 Collet sleeve CLT/SLV/36

Trend CLT/SLV/363 Collet sleeve CLT/SLV/363


Trend Collet Sleeve 3mm To 6.35mm CLT/SLV/363 Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Click here for more information...
£11.00 ex VAT
£13.20 inc VAT
Trend CLT/T3/635 Collet 6.35mm (1/4 Inch) T3  CLT/T3/63

Trend CLT/T3/635 Collet 6.35mm (1/4 Inch) T3 CLT/T3/635


Trend Collet 6.35mm ( Deg Inch) T3 Replacement ¼” inch collet for the T3EK.
Click here for more information...
£3.75 ex VAT
£4.50 inc VAT
Trend 50436007 Collet for Ryobi R150 8mm  5043600

Trend 50436007 Collet for Ryobi R150 8mm 50436007


Trend 50436007 Collet for Ryobi R150 8mm 50436007 Replacement collet.|Does not include the collet nut.|To fit the following machines:-Ryobi R150, R151, RE155K Trend General Title Ryobi Specification For Trend 50436007 Trend Router Cutter Shank Diameter Inch Route Cutter Diameter 8 D mm Router Cutter Diameter 2 D mm Router Cutter Length mm
Click here for more information...
£21.50 ex VAT
£25.80 inc VAT
Trend 2608570102 Collet for Bosch GOF 900A 8mm  260857010

Trend 2608570102 Collet for Bosch GOF 900A 8mm 2608570102


Trend Collet For Bosch GOF900A 8mm 2608570102 8mm collet and nut.
Click here for more information...
£24.50 ex VAT
£29.40 inc VAT
Trend CLT/T10/6 Collet T10 router 6mm  CLT/T10/

Trend CLT/T10/6 Collet T10 router 6mm CLT/T10/6


Trend Collet T10 Router 6mm CLT/T10/6 The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter's shank.
Click here for more information...
£22.00 ex VAT
£26.40 inc VAT
Trend Guide Bush Set 8 Off Imperial       GB/

Trend Guide Bush Set 8 Off Imperial GB/D


Trend Guide Bush Set 8 Off Imperial GB/D Guide bushes guide the router when using a template. |Fits directly to Trend T5E and T9E, and some other light duty routers. |Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Set of eight imperial size guide bushes.
Click here for more information...
£42.00 ex VAT
£50.40 inc VAT
Trend Guide Bush 25.4mm (1 Inch) Diameter GB25

Trend Guide Bush 25.4mm (1 Inch) Diameter GB254


Trend Guide Bush 25.4mm (1 Inch) Diameter GB254 Guide bush guides the router when using a template. |Fits directly to Trend T3,T5,T9,T10 and T11, and some other light duty routers. |Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Click here for more information...
£6.50 ex VAT
£7.80 inc VAT
Trend Machinery Dowels 8 X 40mm 50 Off              DWL/3/5

Trend Machinery Dowels 8 X 40mm 50 Off DWL/3/50


Trend Machinery Dowels 8 X 40mm 50 Off DWL/3/50 8mm x 40mm
Click here for more information...
£1.75 ex VAT
£2.10 inc VAT
Trend Guide Bush 7.93mm Dia (5/16)        GB79

Trend Guide Bush 7.93mm Dia (5/16) GB793


Trend Guide Bush 7.93mm Dia (5/16) GB793 Guide bush guides the router when using a template. |Fits directly to Trend T3,T5,T9,T10 and T11, and some other light duty routers. |Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Click here for more information...
£6.50 ex VAT
£7.80 inc VAT
Trend Guide Bush T9 50mm Od               GB50

Trend Guide Bush T9 50mm Od GB500


Trend Guide Bush T9 50mm Od GB500 Guide bush guides the router when using a template.
Click here for more information...
£11.50 ex VAT
£13.80 inc VAT
Trend Machinery Fixing Kit Subbases Pan Head Screw  FiX/KIT/

Trend Machinery Fixing Kit Subbases Pan Head Screw FiX/KIT/1


Trend Machinery Fixing Kit Subbases Pan Head Screw FiX/KIT/1 Pack of pan head screws for fitting routers to homemade router tables.
Click here for more information...
£1.50 ex VAT
£1.80 inc VAT
Trend ROD/10X360 Guide rods 10mm x 360mm (Pair)  ROD/10X36

Trend ROD/10X360 Guide rods 10mm x 360mm (Pair) ROD/10X360


Trend Guide Rods 10mm X 360mm (Pair) Rod/10X 360 Replacement fence rod for the T11.
Click here for more information...
£15.00 ex VAT
£18.00 inc VAT
Trend WP-KNOB/10 Knob for COMBI100 degrees  WP-KNOB/1

Trend WP-KNOB/10 Knob for COMBI100 degrees WP-KNOB/10


Trend Machinery Knob For Combi1001 WP-KNOB/10 Replacement knob for the COMBI1001.
Click here for more information...
£3.00 ex VAT
£3.60 inc VAT
Trend KB8/F/6 Lobe knob M6 Fem 2 off  KB8/F/

Trend KB8/F/6 Lobe knob M6 Fem 2 off KB8/F/6


Trend Machinery Lobe Knob M6 Fem 2 Off KB8/F/6 Made from re-inforced plastic, a brass insert.|Suitable when a strong clamping action is required.|Supplied as pack of 2.
Click here for more information...
£4.00 ex VAT
£4.80 inc VAT
Trend MITRE/2 Mitre fence plastic complete  MITRE/

Trend MITRE/2 Mitre fence plastic complete MITRE/2


Trend Machinery Mitre Fence Plastic Cut Complete Mitre/2 Metal bar 200mm long Protractor body 102mm wide x 28mm
Click here for more information...
£10.00 ex VAT
£12.00 inc VAT
Trend Machinery Plungebar For T9 Router             PBar/T

Trend Machinery Plungebar For T9 Router PBar/T9


Trend Machinery Plungebar For T9 Router PBar/T9 One-handed cutter height setting. Accurate grooving, Trenching, carving, sign-writing and boring of holes.
Click here for more information...
£22.13 ex VAT
£26.55 inc VAT
Trend N/COMPASS/AEX Router Compass 8mm extension Bars  N/COMPASS/AE

Trend N/COMPASS/AEX Router Compass 8mm extension Bars N/COMPASS/AEX


Trend Machinery Router Compass 8mm Extension Bars N/CompaSS/Ae Four threaded rods available to extend radius on the N/COMPASS/A.
Click here for more information...
£17.50 ex VAT
£21.00 inc VAT
Pages: (1) 2 3 4 5 6