Router Cutter Range

Trend 9/5X1/2TC Small bead radius router cutter 12.7mm radius 9/5X1/2TC

Trend 9/5X1/2TC Small bead radius router cutter 12.7mm radius 9/5X1/2TC Beads Refs. 9/10 & 9/11 have matching cutters Refs. 8/10 & 8/11 for jointing & hinging.
Click here for more information...

Trend 2/55X1/4TC Single flute router cutter 6 mm diameter 2/55X1/4TC

Trend 2/55X1/4TC Single flute router cutter 6 mm diameter 2/55X1/4TC Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass.
Click here for more information...

Trend 46/390X1/2TC Guided large rebater 46/390X1/2TC

Trend 46/390X1/2TC Guided large rebater 46/390X1/2TC Bearing guided for straight or curved work.|For portable and stationary routers. Supplied as standard with Ref. BR/191 fitted. A variety of alloy bearing rings are available to give various rebate sizes. Rings are secured between the two bearings.
Click here for more information...

Trend 3/10X1/4TC Two flute router cutter 3.2 mm diameter 3/10X1/4TC

Trend 3/10X1/4TC Two flute router cutter 3.2 mm diameter 3/10X1/4TC Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. |Two flutes give a clean finish to cut edges. |All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
Click here for more information...

Trend C007X1/4TC Two flute router cutter 6.3mm diameter C007X1/4TC

Trend C007X1/4TC Two flute router cutter 6.3mm diameter C007X1/4TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...

Trend 55/3X3/8HSS Aluminium router cutter 12.7 mm diameter 55/3X3/8HSS

Trend 55/3X3/8HSS Aluminium router cutter 12.7 mm diameter 55/3X3/8HSS Cutter are designed to plunge and machine or mill lateral slots. |All aluminium tooling should be used with a coolant, wax stick or lubricant.
Click here for more information...

Trend Router Cutters Aluminium Spiral Up cut 9.5mmX 25mm S55/11

Trend S55/11X3/8STC Aluminium spiral upcut router cutter 9.5 mm diameter S55/11X3/8STC Cutter are designed to plunge and machine or mill lateral slots. |All aluminium tooling should be used with a coolant, wax stick or lubricant.
Click here for more information...

Trend Router Cutters Two Flute 18.2mm Dia X 21mm Cut 4/4X 3/

Trend Router Cutters Two Flute 18.2mm Dia X 21mm Cut 4/4X 3/8TC TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
Click here for more information...

Trend 46/21X3/8TC Trimming router cutter 18.2 mm diameter 46/21X3/8TC

Trend 46/21X3/8TC Trimming router cutter 18.2 mm diameter 46/21X3/8TC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend TR/KFP/2 Kitchen fitters pack TR/KFP/2

Trend TR/KFP/2 Kitchen fitters pack TR/KFP/2 Four piece cutter pack aimed at kitchen fitters.
Click here for more information...

Trend TR24X8MMTC Guided trimmer 6.3mm diameter x 25.4 TR24X8MMTC

Trend TR24X8MMTC Guided trimmer 6.3mm diameter x 25.4 TR24X8MMTC For trimming and bevelling timber, lippings and plastic laminate edges.
Click here for more information...

Trend TR14X8MMTC Two flute router cutter 12.7mm diameter TR14X8MMTC

Trend TR14X8MMTC Two flute router cutter 12.7mm diameter TR14X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.|For housing, grooving and mortising.|Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.|PTFE coated, indicated by
Click here for more information...

Trend C104X8MMTC Self guided broken ogee quirk 4mm radius C104X8MMTC

Trend C104X8MMTC Self guided broken ogee quirk 4mm radius C104X8MMTC Alternative bearing B127A removes the lower quirk.
Click here for more information...

Trend C192X1/2TC Offset Tongue and groover C192X1/2TC

Trend C192X1/2TC Offset Tongue and groover C192X1/2TC A reversible finger jointer, to increase the gluing area for edge to edge joints.
Click here for more information...

Trend C191X1/2TC Bearing guided hand rail 51mm radius C191X1/2TC

Trend C191X1/2TC Bearing guided hand rail 51mm radius C191X1/2TC This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X1/2TC.|For stationary machines - 12000 RPM recommended speed.
Click here for more information...

Trend C179X8MMTC Dovetail 19.1mm x 97 degrees x 25mm cut C179X8MMTC

Trend C179X8MMTC Dovetail 19.1mm x 97 degrees x 25mm cut C179X8MMTC These cutters are for Trend Craft Dovetail Jigs.
Click here for more information...

Trend C042X1/4TC Dovetail router cutter angle=99 degrees x 9.5mm diameter C042X1/4TC

Trend C042X1/4TC Dovetail router cutter angle=99 degrees x 9.5mm diameter C042X1/4TC These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs.
Click here for more information...

Trend C049X1/2TC Self guided chamfer angle=45 degrees x 12.7mm Cut C049X1/2TC

Trend C049X1/2TC Self guided chamfer angle=45 degrees x 12.7mm Cut C049X1/2TC Self-guiding chamfer/bevel cutter.|Bearing follows the board beneath.
Click here for more information...

Trend Router Cutters Spare Part Block For C157 Bevel SP-C157

Trend SP-C157A Block for C157 bevel SP-C157A Replacement block for the C157.
Click here for more information...

Trend 33/23X1/4 Threaded arbor 33/23X1/4

Trend 33/23X1/4 Threaded arbor 33/23X1/4 A threaded arbor with a UNC1/4 bore.
Click here for more information...