Woodworking from Snappy

Trend Snappy Centring Guide 5/64 Drill SNAP/DBG/5

Trend Snappy Centring Guide 5/64 Drill SNAP/DBG/5 This sprung-loaded drill bit guide is self-centering.|Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment.|They can be easily dismantled for cleaning and are supplied with a HSS drill bit.
Click here for more information...

Trend Snappy Auger Bit 22mm X 155mm SNAP/AB/22

Trend Snappy Auger Bit 22mm X 155mm SNAP/AB/22 Made from Carbon steel and precision machined.|Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury.
Click here for more information...

Trend WP-SNAP/D/764 Snappy 7/64 drill bit only WP-SNAP/D/764

Trend Snappy 7/64 Drill Bit Only WP-SNAP/D/76 Replacement drill bit.
Click here for more information...

Trend WP-SNAP/D/4MM Snappy 4mm drill only WP-SNAP/D/4MM

Trend Snappy 4mm Drill Only WP-SNAP/D/4m Replacement drill bit.
Click here for more information...

Trend WP-SNAP/DA/6M Snappy drill adapter 6mm drill WP-SNAP/DA/6M

Trend Snappy Drill Adapter 6mm Drill WP-SNAP/Da/6 Replacement drill adaptor.
Click here for more information...

Trend Snappy Flat Bit 35mm SNAP/FB/35

Trend Snappy Flat Bit 35mm SNAP/FB/35 An economical bit for cutting quick holes in timber.|With centre point, back tapered cutting edge and ground chip breakers.
Click here for more information...

Trend Snappy 5 PCutForstner Set 15-35mm SNAP/FS1/SET

Trend Snappy 5 PCutForstner Set 15-35mm SNAP/FS1/SET High quality forged and ground carbon steel short Forstner bits for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Hole Saw 44mm (1- Deg) Bi-Met SNAP/HS/44

Trend Snappy Hole Saw 44mm (1- Deg) Bi-Met SNAP/HS/44 Diameter - 44mm
Click here for more information...

Trend Snappy Stub Auger 16mm X 105mm SNAP/SA/16

Trend Snappy Stub Auger 16mm X 105mm SNAP/SA/16 Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur.
Click here for more information...

Trend Snappy Depth Stop Deg Dia D/CSK

Trend Snappy Depth Stop Deg Dia D/CSK Adjustable depth stop to fit SNAP/CS/12 diameter.|Supplied with a hex key.|| Suitable for SNAP/CS/12 Supplied with hex key
Click here for more information...

Trend Snappy Deg Drill Bit Ten Pack SNAP/DB18/1

Trend Snappy Deg Drill Bit Ten Pack SNAP/DB18/1 Pack of 10 spare drills to suit the drill countersinks. Supplied in a storage tube.
Click here for more information...

Trend Snappy Drill Bit Guide 4PCutSet SNAP/DBG/SET

Trend Snappy Drill Bit Guide 4PCutSet SNAP/DBG/SET These sprung-loaded drill bit guides are self-centering.|Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment.|They can be easily dismantled for cleaning and are supplied with a HSS drill bit.
Click here for more information...

Trend Snappy Nutdriver 7mm A/F MagnetiCut SNAP/ND/7M

Trend Snappy Nutdriver 7mm A/F MagnetiCut SNAP/ND/7M Ideal for bolts.
Click here for more information...

Trend Snappy Square Bit MiX Pack Of 3 SNAP/SQ/123

Trend Snappy Square Bit MiX Pack Of 3 SNAP/SQ/123 Square Robertson screwdriver bits.
Click here for more information...

Trend Snappy TCutD/CSK 5/64 Drill SNAP/CS/4TC

Trend Snappy TCutD/CSK 5/64 Drill SNAP/CS/4TC Tungsten Carbide tipped version of the popular Snappy drill countersink.|This tool can be used in abrasive materials such as laminated chipboard.|The drills produce pilot holes only. D=9.5mm d=2.0mm (5/64 inch) Screw size (S/W=n.a) (H/W)=No.
Click here for more information...

Trend Snappy PHillips No 1 Bit 150mm Ol SNAP/PH/1A

Trend Snappy PHillips No 1 Bit 150mm Ol SNAP/PH/1A Extra long PHillips screwdriver bits For use with Snappy Quick Chuck.
Click here for more information...

Trend Snappy 25mm Bit PHillips 1 Ten Tin SNAP/Iph1/10

Trend Snappy 25mm Bit PHillips 1 Ten Tin SNAP/Iph1/10 A pack of ten 25mm No. 1 PHillips 25mm insert bits Titanium nitride coating (TiN) coated.|They have a round shaft to reduce breakage giving excellent torque transmission, high resistance to Cam-Out (coming out of screw head)and extended life time.
Click here for more information...

Trend Snappy Quick Chuck Yankee Shk Large SNAP/Qcyl

Trend Snappy Quick Chuck Yankee Shk Large SNAP/Qcyl The Snappy system starts with the Quick Chuck.|Six flats on the shank ensure precise location in the chuck.|A sprung loaded outer sleeve makes it easy to remove attachments.|This chuck is suitable for use in 5/16 inch Yankee Ratchet screwdrivers.
Click here for more information...

Trend Snappy 19 Piece MetriCutKit SNAP/KIT/2

Trend Snappy 19 Piece MetriCutKit SNAP/KIT/2 The Snappy system is available in a 19 piece boxed set in a handy carrying case.
Click here for more information...

Trend Snappy Wire Brush Cup 50mm Steel SNAP/Wb/C50S

With ¼”" hex shank allows rapid tool change. The 0.3mm steel brush tackles a wide range of abrasive jobs.
Click here for more information...