Drill Bits

Trend Snappy Centring Guide 5/64 Drill SNAP/DBG/5

Trend Snappy Centring Guide 5/64 Drill SNAP/DBG/5 This sprung-loaded drill bit guide is self-centering.|Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment.|They can be easily dismantled for cleaning and are supplied with a HSS drill bit.
Click here for more information...

Trend Snappy Centring Guide 7/64 Drill SNAP/DBG/7

Trend Snappy Centring Guide 7/64 Drill SNAP/DBG/7 This sprung-loaded drill bit guide is self-centering.|Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment.|They can be easily dismantled for cleaning and are supplied with a HSS drill bit.
Click here for more information...

Trend WP-SNAP/D/2MM Snappy 2mm drill only WP-SNAP/D/2MM

Trend Snappy 2mm Drill Only WP-SNAP/D/2m Replacement drill bit.
Click here for more information...

Trend WP-SNAP/D/332 Snappy 3/32 drill bit only WP-SNAP/D/332

Trend Snappy 3/32 Drill Bit Only WP-SNAP/D/33 Replacement drill bit.
Click here for more information...

Trend WP-SNAP/D/764 Snappy 7/64 drill bit only WP-SNAP/D/764

Trend Snappy 7/64 Drill Bit Only WP-SNAP/D/76 Replacement drill bit.
Click here for more information...

Trend WP-SNAP/D/532 Snappy 5/32 drill bit only WP-SNAP/D/532

Trend Snappy 5/32 Drill Bit Only WP-SNAP/D/53 Replacement drill bit.
Click here for more information...

Trend WP-SNAP/AK/18 Snappy hex key 1/8 (3.2mm ) WP-SNAP/AK/18

Trend Snappy HeX Key Deg (3.2mm) WP-SNAP/AK/ Replacement hex key.
Click here for more information...

Trend WP-SNAP/D/4MM Snappy 4mm drill only WP-SNAP/D/4MM

Trend Snappy 4mm Drill Only WP-SNAP/D/4m Replacement drill bit.
Click here for more information...

Trend WP-SNAP/D/7MM Snappy 7mm drill only WP-SNAP/D/7MM

Trend Snappy 7mm Drill Only WP-SNAP/D/7m Replacement drill bit.
Click here for more information...

Trend WP-SNAP/DA/6M Snappy drill adapter 6mm drill WP-SNAP/DA/6M

Trend Snappy Drill Adapter 6mm Drill WP-SNAP/Da/6 Replacement drill adaptor.
Click here for more information...

Trend Snappy Flat Bit 32mm SNAP/FB/32

Trend Snappy Flat Bit 32mm SNAP/FB/32 An economical bit for cutting quick holes in timber.|With centre point, back tapered cutting edge and ground chip breakers.
Click here for more information...

Trend Snappy Flat Bit 35mm SNAP/FB/35

Trend Snappy Flat Bit 35mm SNAP/FB/35 An economical bit for cutting quick holes in timber.|With centre point, back tapered cutting edge and ground chip breakers.
Click here for more information...

Trend Snappy Glass Drill 3mm SNAP/GD/3mm

Trend Snappy Glass Drill 3mm SNAP/GD/3mm Diameter=3mm Shank diameter=¼” inch
Click here for more information...

Trend Snappy Glass Drill 4mm SNAP/GD/4mm

Trend Snappy Glass Drill 4mm SNAP/GD/4mm Diameter=4mm Shank diameter=¼” inch
Click here for more information...

Trend Snappy Hole Saw 35mm (1- Deg) Bi-Met SNAP/HS/35

Trend Snappy Hole Saw 35mm (1- Deg) Bi-Met SNAP/HS/35 Diameter - 35mm
Click here for more information...

Trend Snappy Hole Saw 38mm (1- Deg) B-Meta SNAP/HS/38

Trend Snappy Hole Saw 38mm (1- Deg) B-Meta SNAP/HS/38 Diameter - 38mm
Click here for more information...

Trend Snappy 3/32 Drill And Adapter SNAP/D/3

Trend Snappy 3/32 Drill And Adapter SNAP/D/3 The HSS drill bit is gripped by a spring steel collet into the hex shaft.|The hex shanks snap into the Quick Chuck.
Click here for more information...

Trend Snappy Depth Stop Deg Dia D/CSK SNAP/Ds/38

Trend Snappy Depth Stop Deg Dia D/CSK SNAP/Ds/38 Adjustable depth stop to fit Snappy drill countersink SNAP/CS/4-10 diameter.
Click here for more information...

Trend Snappy 5mm Drill And Adapter SNAP/D/5mm

Trend Snappy 5mm Drill And Adapter SNAP/D/5mm The HSS drill bit is gripped by a spring steel collet into the hex shaft.|The hex shanks snap into the Quick Chuck.
Click here for more information...

Trend Snappy Tube Plug Cutter 12.7mm SNAP/PC/127T

Trend Snappy Tube Plug Cutter 12.7mm SNAP/PC/127T A direct drive shank tube type plug cutter with use with the Snappy Quick Chuck. The plug cutter creates a wooden plug or pellet to disguise screw heads.
Click here for more information...