Woodworking From Proxxon

Proxxon Gear Chuck

Capacity to 10 mm, with key and MT1, for
Click here for more information...

£28.13 ex VAT
£33.76 inc VAT

Proxxon FF 400 Micro Miller FF400

Proxxon FF 400 Micro Miller FF400 Precision and Versatility. A precise work centre with an accuracy of 0.05 mm. The headstock swivels through 360?, which is indicated on a scale. 6 spindle speeds from 140 to 2,470/min are achieved by means of pulleys and a Poly-V belt. Quill accepts collets 6, 8, 10 and 12 mm (included).
Click here for more information...

£1,168.82 ex VAT
£1,402.58 inc VAT

Proxxon AS/E Vacuum Cleaner Controller

The controller supplies the powertool (portable or stationary) and vacuum cleaner with power. It switches on the vacuum cleaner while the powertool is operational. Once the powertool is switched off, a 3 second run-down period ensures the workplace is properly vacuumed. Additional positions switch the vacuum cleaner on or off permanently.
Click here for more information...

£19.91 ex VAT
£23.89 inc VAT

Proxxon DH40 Thickness Planer DH40

Proxxon DH40 Thickness Planer DH40 With a planing thickness of 40 x 80 mm the smallest and finest in the world! Perfect for vibration-free planing of soft and hard woods giving you smooth and fine finished surfaces for smaller work.
Click here for more information...

£377.48 ex VAT
£452.98 inc VAT

Proxxon Jigsaw Blade Special Steel 2 pces

Pitch of 1.06 mm, teeth ground and set. Work on hard and soft woods, plywood, fibreglass reinforced sheets as well as some plastics. Ideal for very tight curves and clean cuts.
Click here for more information...

£1.79 ex VAT
£2.15 inc VAT

Proxxon Jigsaw Blades HSS 2 pces

Tooth pitch of 1.5 mm with teeth set and ground. Useable on metals, especially aluminium and softer alloys, fibreglass, plexiglass and insulating materials.
Click here for more information...

£2.15 ex VAT
£2.58 inc VAT

Proxxon Blades For MBS 220/E - 14 tpi

Swedish steel (1,065 x 5.0 x 0.6 mm). Coarse-toothed (14 TPI).
Click here for more information...

£7.85 ex VAT
£9.42 inc VAT

Proxxon Blades For MBS 220/E - 14 tpi

Swedish steel (1,065 x 5.0 x 0.6 mm). Special tempered steel, with induction hardened teeth. Extra narrow for tight curves (1,065 x 3.5 x 0.4 mm). Coarse-toothed (14 TPI).
Click here for more information...

£10.10 ex VAT
£12.12 inc VAT

Proxxon Polishing Set, 10 Pieces

For polishing metal, glass, precious metals, porcelain and plastic. Consists of 3 felt polishing bits (cylinder, cone, wheel), 3 silicon polishing bits (bullet, cylinder and wheel).
Click here for more information...

£8.27 ex VAT
£9.93 inc VAT

Proxxon Polishing Acc In Silicone - 5Pcs

Plastic compound, used for surface smoothing and polishing of precious metals, non-ferrous metals, hardened metals, as well as glass, porcelain, wood, rubber, plastic.
Click here for more information...

£4.58 ex VAT
£5.50 inc VAT

Proxxon Hard Microdrills 1.5mm

Made of tungsten for optimum lifetime. For drilling glass, semi-precious stones, porcelain, ceramics, marble and other hard stones. With ideal cutting angle of 6?.
Click here for more information...

£5.85 ex VAT
£7.02 inc VAT

Proxxon SL12/E Orbital Sander

For form grinding, coarse and fine surface and edge sanding, for resanding primer and surface finishes. Its safety voltage and reducible stroke count makes it ideal for wet sanding. Practical clamping unit for sandpaper (no special sheets needed). Strips can simply be cut from widely available sandpaper.
Click here for more information...

£31.44 ex VAT
£37.72 inc VAT

Proxxon Silicon Carbide Sanding Disc -60 Grit

Diameter 50 mm.
Click here for more information...

£2.16 ex VAT
£2.59 inc VAT

Proxxon Tungsten Vanadium Milling Bits

Selected tungsten vanadium steel. Purpose made of stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best working of soft woods, NF and precious metals, as well as plastics and plaster of paris.
Click here for more information...

£3.63 ex VAT
£4.35 inc VAT

Proxxon Fex Tile Cutting Blade

Complete with tungsten carbide cutter. Ideal for smaller cuts in wall tiles, wood and plaster of paris. It takes seconds to convert the drill/grinder FBS 240/E, MICROMOT 50 and 50/E as well as the professional drill/grinder IB/E into a tile cutting system.
Click here for more information...

£5.85 ex VAT
£7.02 inc VAT