Trend Snappy

Trend Snappy Auger Bit 10mm X 155mm SNAP/AB/10

Trend Snappy Auger Bit 10mm X 155mm SNAP/AB/10 Made from Carbon steel and precision machined.|Has a spiral point, single flute. Ideal for quick, clean deep holes.
Click here for more information...

Trend Snappy Auger Bit 12mm X 155mm SNAP/AB/12

Trend Snappy Auger Bit 12mm X 155mm SNAP/AB/12 Made from Carbon steel and precision machined.|Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury.
Click here for more information...

Trend Snappy Forstner 10mm SNAP/FS/10

Trend Snappy Forstner 10mm SNAP/FS/10 High quality forged and ground carbon steel short Forstner bit for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Forstner 12mm SNAP/FS/12

Trend Snappy Forstner 12mm SNAP/FS/12 High quality forged and ground carbon steel short Forstner bit for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Forstner 15mm SNAP/FS/15

Trend Snappy Forstner 15mm SNAP/FS/15 High quality forged and ground carbon steel short Forstner bit for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Forstner 16mm SNAP/FS/16

Trend Snappy Forstner 16mm SNAP/FS/16 High quality forged and ground carbon steel short Forstner bit for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Hole Saw 28.6mm (1- Deg) SNAP/HS/286

Trend Snappy Hole Saw 28.6mm (1- Deg) SNAP/HS/286 Diameter -
Click here for more information...

Trend Snappy Hole Saw 32mm (1- Deg) B-Meta SNAP/HS/32

Trend Snappy Hole Saw 32mm (1- Deg) B-Meta SNAP/HS/32 Diameter - 32mm
Click here for more information...

Trend Snappy Hole Saw 35mm (1- Deg) Bi-Met SNAP/HS/35

Trend Snappy Hole Saw 35mm (1- Deg) Bi-Met SNAP/HS/35 Diameter - 35mm
Click here for more information...

Trend Snappy Masonry Drill 5mmX 105mm T Cut SNAP/MD/5

Trend Snappy Masonry Drill 5mmX 105mm T Cut SNAP/MD/5 Tungsten Carbide Tipped masonry drill to suit wall plugs.
Click here for more information...

Trend Snappy Masonry Drill 6mmX 120mm T Cut SNAP/MD/6

Trend Snappy Masonry Drill 6mmX 120mm T Cut SNAP/MD/6 Tungsten Carbide Tipped masonry drill to suit wall plugs.
Click here for more information...

Trend Snappy Masonry Drill 7mmX 123mm T Cut SNAP/MD/7

Trend Snappy Masonry Drill 7mmX 123mm T Cut SNAP/MD/7 Tungsten Carbide Tipped masonry drill to suit wall plugs.
Click here for more information...

Trend Snappy Stub Auger 8mm X 105mm SNAP/SA/8

Trend Snappy Stub Auger 8mm X 105mm SNAP/SA/8 Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur.
Click here for more information...

Trend Snappy Stub Auger 20mm X 105mm SNAP/SA/20

Trend Snappy Stub Auger 20mm X 105mm SNAP/SA/20 Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur.
Click here for more information...

Trend Snappy Stub Auger 25mm X 105mm SNAP/SA/25

Trend Snappy Stub Auger 25mm X 105mm SNAP/SA/25 Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur.
Click here for more information...

Trend Snappy Centring Guide 4.36mm Drill SNAP/DBG/12

Trend Snappy Centring Guide 4.36mm Drill SNAP/DBG/12 This sprung-loaded drill bit guide is self-centering.|Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment.|They can be easily dismantled for cleaning and are supplied with a HSS drill bit.
Click here for more information...

Trend Snappy 7 PCutMetriCutDrill Set 1-7mm SNAP/D/SET/2

Trend Snappy 7 PCutMetriCutDrill Set 1-7mm SNAP/D/SET/2 The HSS drill bits are gripped by a spring steel collet into the hex shaft.|The hex shanks snap into the Quick Chuck.|The hex collar, is supplied in the sets to enable drills to be removed with two spanners.
Click here for more information...

Trend Snappy Drill Bit Guide 4PCutSet SNAP/DBG/SET

Trend Snappy Drill Bit Guide 4PCutSet SNAP/DBG/SET These sprung-loaded drill bit guides are self-centering.|Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment.|They can be easily dismantled for cleaning and are supplied with a HSS drill bit.
Click here for more information...

Trend Snappy Handriver & Sb2 Set SNAP/DRv/SET

Trend Snappy Handriver & Sb2 Set SNAP/DRv/SET Hand driver is 160mm long with a ¼” inch hex chuck.
Click here for more information...

Trend Snappy 8 Piece Stub Auger Bit Set.

Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur. They must only be used with torque control drills.
Click here for more information...