Trend Snappy Sets

Trend WP-SNAP/D/6W Snappy wood saw drill 6mm WP-SNAP/D/6W

Trend Snappy Wood Saw Drill 6mm WP-SNAP/D/6W Replacement wood saw drill.
Click here for more information...

Trend Snappy 3PCutFlat Bit Set 16/19/25mm SNAP/FB1/SET

Trend Snappy 3PCutFlat Bit Set 16/19/25mm SNAP/FB1/SET Economical bits for cutting quick holes in timber.|With centre point, back tapered cutting edge and ground chip breakers.
Click here for more information...

Trend Snappy 5 PCutForstner Set 15-35mm SNAP/FS1/SET

Trend Snappy 5 PCutForstner Set 15-35mm SNAP/FS1/SET High quality forged and ground carbon steel short Forstner bits for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Hole Set Plumbers 19-57mm SNAP/HS2/SET

Trend Snappy Hole Set Plumbers 19-57mm SNAP/HS2/SET Hole saw diameters available in this set are:- 19,22,28,38,44 and
Click here for more information...

Trend Snappy Hole Set Electrician 22-64mm SNAP/HS1/SET

Trend Snappy Hole Set Electrician 22-64mm SNAP/HS1/SET Hole saw diameters available in this set are:- 22,28,35,44,51 and 64mm
Click here for more information...

Trend Snappy Measured HeX Drill Set 13PCut SNAP/MHD/SET

Trend Snappy Measured HeX Drill Set 13PCut SNAP/MHD/SET
Click here for more information...

Trend Snappy 5 PCutTCT Countersink Set SNAP/CSTC/Se

Trend Snappy 5 PCutTCT Countersink Set SNAP/CSTC/Se Tungsten Carbide tipped version of the popular Snappy drill countersinks.|These tools can be used in abrasive materials such as laminated chipboard.|The drills produce pilot holes only. Drill diameters - 2.0mm (5/64") 2.5mm (3/32") 2.75mm (7/64") 3.25mm (?”") 3.
Click here for more information...

Trend Snappy No 6 Four Piece Set SNAP/NO6/SET

Trend Snappy No 6 Four Piece Set SNAP/NO6/SET This set incorporates one of each of the four main lines and is designed for No.6 screw size. Screw size=No.6 Quick chuck Drill countersink No.
Click here for more information...

Trend Snappy No 8 Four Piece Set SNAP/NO8/SET

Trend Snappy No 8 Four Piece Set SNAP/NO8/SET This set incorporates one of each of the four main lines and is designed for No.8 screw size. Screw size=No.8 Quick chuck Drill countersink No.
Click here for more information...

Trend Snappy No 10 Four Piece Set SNAP/NO10/SET

Trend Snappy No 10 Four Piece Set SNAP/NO10/SET This set incorporates one of each of the four main lines and is designed for No.10 screw size.| Screw size=No.10 Quick chuck Drill countersink No.
Click here for more information...

Trend Snappy 7 PCutImperial Drill Set SNAP/D/SET

Trend Snappy 7 PCutImperial Drill Set SNAP/D/SET The HSS drill bits are gripped by a spring steel collet into the hex shaft.|The hex shanks snap into the Quick Chuck.|The hex collar, is supplied in the sets to enable drills to be removed with two spanners.
Click here for more information...

Trend Snappy 7 PCutMetriCutDrill Set 1-7mm SNAP/D/SET/2

Trend Snappy 7 PCutMetriCutDrill Set 1-7mm SNAP/D/SET/2 The HSS drill bits are gripped by a spring steel collet into the hex shaft.|The hex shanks snap into the Quick Chuck.|The hex collar, is supplied in the sets to enable drills to be removed with two spanners. 7 piece HSS drill set Drill diameters - 1.0mm 2.0mm 3.0mm 4.0mm 5.0mm 6.0mm 7.
Click here for more information...

Trend Snappy Drill Bit Guide 4PCutSet SNAP/DBG/SET

Trend Snappy Drill Bit Guide 4PCutSet SNAP/DBG/SET These sprung-loaded drill bit guides are self-centering.|Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment.|They can be easily dismantled for cleaning and are supplied with a HSS drill bit. Drill size - 2.0mm (5/64 inch) Screw size - No.
Click here for more information...

Trend Snappy Wood Saw Set 32 To 64mm SNAP/WS1/SET

Trend Snappy Wood Saw Set 32 To 64mm SNAP/WS1/SET Snappy Wood Saw set contains six sizes of carbon steel self-locking ring blades.|It provides an ecomical solution for drilling large holes in natural timbers with one quick changing tool. Hole sizes vary from 32mm to 64mm. Sizes are 32,38,44,51,57 and 64mm.
Click here for more information...

Trend Snappy Handriver & Sb2 Set SNAP/DRv/SET

Trend Snappy Handriver & Sb2 Set SNAP/DRv/SET Hand driver is 160mm long with a ¼” inch hex chuck. Insert bits included are 10 Torx bits, 3 Pozi bits, 3 PHillips bits, 4 Flat bits, 7 Hex bits, 3 Robertson bits and a magnetic holder.
Click here for more information...

Trend Snappy Bit Set 30pcs SNAP/TH1/SET

Trend Snappy Bit Set 30pcs SNAP/TH1/SET Heavy duty fabric tool holder available with assorted Snappy tools. With elastic pockets to hold Snappy shanks. Supplied with a snappy pencil. Tool holders have a belt strap and are Velcro fastening.
Click here for more information...

Trend Snappy Bit Set 60pcs SNAP/TH2/SET

Trend Snapp Bit Set 60pcs SNAP/TH2/SET Heavy duty fabric tool holder available with assorted Snappy tools. With elastic pockets to hold Snappy shanks. Supplied with a snappy pencil. Tool holders have a belt strap and are Velcro fastening.
Click here for more information...