Plumbing

HILMOR T620103 TUBE STOP FOR CM42/EL25/EL32/K3B

Tube stop for use with EL25/32, CM42 and
Click here for more information...

SIEVERT 2295 EASYJET GAS TORCH

Primus 2295 Easy Jet Gas Torch. Anti flare even below 0?C . Unique 1 bar regulator for cartridge pressure control. Fixed medium burner supplied with torch.
Click here for more information...

SIEVERT 8843 SOLDER BIT

Primus 8843 Solder Bit. Solder bit for use with 2293 and 2294. Copper bit, one end pointed the other flat, for soldering, joining of lead and tin.
Click here for more information...

Bailey 1960 DRAIN TEST PLUG 4IN PLASTIC CAP

Centre locking drain test plugs available with plastic blanking cap, suitable for air or water testing of drains and sewers. Full range available on request 12.5mm through to 1250mm.
Click here for more information...

MONUMENT 180S NIPPLE CAP 1/2 BSP

Made from brass with a leather washer for attachment to drain test plug outlets to enable connection of rubber hose to the U gauge. Size is 1/2in
Click here for more information...

MONUMENT 483N BEVEL CUTTER 11/16IN

Bevelled Tap Reseater Cutter to fit Monument 450, 454, 455, 458 and 460 Tap Reseating Tools. Size.
Click here for more information...

MONUMENT 365F INT / EXT PIPE END DE BURRER

Internal and external copper pipe end deburrer.
Click here for more information...

SCOTTOOL SPARE CUTTER 3/4IN BSP CONICAL

Spare cutters are available for all of our tap reseating tools with the internal thread being 5/16in BSF. The cutters are case hardened for long life and will fit other makes of tap reseater.
Click here for more information...

MONUMENT 265B PIPE CUTTER NO 1

High quality tools for use by professional and DIY Plumbing Installers, heating engineers, and maintenance staff. Each tool assures a square even cut. All parts liable to wear are heat treated. The fluted handles of sizes 1 and 2A are fitted with a spare wheel. Available in four models Size 0, 1, 2A and 3 to cut pipe from 3mm up to 82mm. The
Click here for more information...

JUBILEE 1X W/S40 WINGSPADE HOSE CLIP 25-40MM

Jubilee clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9002. Made from mild steel, zinc plated and used for fixing flexible rubber hoses, metal tubes etc. Wingspade fitting instead of the normal 7mm Hexagon.
Click here for more information...

JUBILEE 9.5 MSZP HOSE CLIP 210 - 242MM

Jubilee clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9002. Made from mild steel, zinc plated and used for fixing flexible rubber hoses, metal tubes etc.
Click here for more information...

JUBILEE 2A STAINLESS STEEL HOSE CLIP 35-50MM

Jubilee clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9002. Stainless Steel, used for fixing flexible rubber hoses, metal tubes etc. Stainless Steel gives increased resistance to corrosion.
Click here for more information...

JUBILEE 1 HOSE CLIP CARD(1) 25 - 35MM

Jubilee clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9002. Made from mild steel, zinc plated and used for fixing flexible rubber hoses, metal tubes etc.
Click here for more information...

MONUMENT 3318H REFILL SNAKE 25FT X 1/4IN

Refill Snake for use on sink traps,showers and basins for 1.1/4in (35mm) wastes. Size.
Click here for more information...

EMIR 81 PLASTIC LEAD DRESSER 55MM

Used for beating heavy gauge lead onto flat surfaces and into corners for roofing etc. Made from solid high density plastic with offset handle and good knuckle room with hanging eyelet. Length 12.5 in (313mm), Width 2.1/4in (55mm).
Click here for more information...

HILMOR T591027 22MM FORMER FOR GL MINOR

This precision high pressure aluminium diecast former is for use with the Hilmor GL Minor Pipe Bender. With pre-determined angles cast onto the former for ease of use. (For copper pipe only) Size.
Click here for more information...

HILMOR T561008 35MM ALUM GUIDE FOR CM35/42/K3B

Extruded Aluminium Guide for use with CM35, CM42, and K3B Pipe Benders. (For copper pipe only) Size.
Click here for more information...

REHAU BRASS TAP CONNECTOR 3/4IN

A high quality precision engineered Brass tap connector which enables a 1/2in hose to be connected to a 3/4in tap. It is easy to connect and, as it is rustproof, will last a lifetime.
Click here for more information...

MONUMENT 134F SOCKET FORMING TOOL 28MM

Socket forming tools for joining two pieces of copper pipe of equal diameter together without using fittings. The loose former allows easier withdrawal of tool after use. The resulting capillary joint can be soft or hard soldered. 28mm.
Click here for more information...

SCOTTOOL SQUARE HEAD STOPCOCK KEY 5/8IN X 42IN

For reaching and turning off/on stopcocks set below ground level. Zinc plated for corrosion resistance.
Click here for more information...