Kreg

Kreg Perfect Miter Attachment (For Kreg Flipstop & Solid Product

Our 'Perfect Miter' attachment is designed to support the mitered end of a board so that the sharp point of the miter is not damaged while cutting. The attachment also allows the mitered end to be measured off of two points of contact instead of the toe of the miter, creating increased accuracy.
Click here for more information...

£13.09 exVAT
£15.05 incVAT

Kreg Mini Trak - 48' (4') (Includes 4' Non-Adhesive R-L Tape)

Mini Trak can be used to produce countless types of woodshop jigs and fixtures such as taper jigs, cut-off sleds, and more. An adaptation of our other popular styles of trak, Mini Trak contains t-slots that will capture the head of a standard 1/4' hex bolt. You can surface mount Mini Trak or mount it flush into a 3/8' x 3/4' dado or rabbet.
Click here for more information...

£12.65 exVAT
£14.55 incVAT

Kreg Top Trak - 24' (2')

Called Top Trak because it mounts to the top-side of a shop-made 3/4' thick fence, this extremely versatile and rugged anodized aluminum extrusion works well with various woodworking machines. Trak features a self-aligning L-shaped mounting foot for easy installation to a shop-made fence.
Click here for more information...

£13.96 exVAT
£16.06 incVAT

Kreg Top Trak - 48' (4')

Called Top Trak because it mounts to the top-side of a shop-made 3/4' thick fence, this extremely versatile and rugged anodized aluminum extrusion works well with various woodworking machines. Trak features a self-aligning L-shaped mounting foot for easy installation to a shop-made fence.
Click here for more information...

£20.09 exVAT
£23.11 incVAT

Kreg Heavy Duty Trak - 24' (2')

Our Heavy Duty Trak is an L-shaped, anodized aluminum extrusion that is extremely straight and perfect for heavy use commercial applications. Contains four T-slots which accommodate the head of a standard 1/4' hex bolt. This is the same extrusion that is included in the Deluxe Miter Gauge System.
Click here for more information...

£26.22 exVAT
£30.15 incVAT

Kreg Heavy Duty Trak - 48' (4')

Our Heavy Duty Trak is an L-shaped, anodized aluminum extrusion that is extremely straight and perfect for heavy use commercial applications. Contains four T-slots which accommodate the head of a standard 1/4' hex bolt. This is the same extrusion that is included in the Deluxe Miter Gauge System.
Click here for more information...

£33.23 exVAT
£38.21 incVAT

Kreg Adjustable Miter Trak - 42'

The wakness of most router tables is that there is no miter slot for using a miter gauge with the cutter. Our Adjustable Miter Trak provides a clever and inexpensive means of positioning a miter slot on the router table. The extrusion works with any 3/4' by 3/8' miter gauge bar and adjusts inward by tightening the screws for a snug fit.
Click here for more information...

£15.72 exVAT
£18.07 incVAT

Kreg Jig & Fixture Bar - 30'

This is the same adjustable bar that comes standard on the Precision Miter Gauge. 3/8' tall x 3/4' wide bar has six plugs along the 30' length of the bar adjust with the turn of a screwdriver to take up any play in the miter gauge slot. Mounting holes are located every 4' along the length of the bar. Perfect for building workshop jigs and fixtures.
Click here for more information...

£15.28 exVAT
£17.57 incVAT

Kreg Trak Clamp

This inexpensive and versatile clamp works great in a variety of applications. Fits the Mini Trak, Top Trak or HD Trak. You may also mount the clamp to a piece of wood by drilling a 1/4' hole and then countersinking a 7/16' hole for the bolt head.
Click here for more information...

£2.58 exVAT
£2.97 incVAT

Kreg Self-Adhesive Measuring Tape (Right-Left Reading) (12' Long

This 1/2' wide, self-adhesive measuring tape fits snugly into the indentation on the topside of our Top Trak and Heavy Duty Trak. Metallic tape is highly scuff resistant and can be trimmed to length with a scissors. Be sure to choose the correct tape orientation...
Click here for more information...

£3.46 exVAT
£3.98 incVAT

Powertool Direct - Power Tools