Powertool Direct

For use as a cross-cut, plunge-cut, or portable circular saw Machine and guide track are firmly connected Quick-release catch facilitates separation of machine and guide track Free-standing operation without a rest Forget everything you know about portable circular saws. The MAFELL KSS 400 cross-cutting system is completely different. Its novel feature is the unique guide track that not only guides the portable circular saw, but is also connected to it to form a single unit: the KSS 400 cross-cutting system. It's clearly a cut above the rest. The KSS 400 cross-cutting system enables you to saw in a standing position and without a rest, with angular precision and with only one hand on the machine. Its handling is unbeatable: thanks to magnesium die-cast components, the entire system weighs only 5.2 kg. Once the cut has been executed, the saw automatically returns to the starting position. The maximum cutting length, exploiting the full cutting depth, is 400 mm. The quick-release catch enables you to detach the machine from the guide track in a single, quick action. The saw can then be used as a separate portable circular unit with all the functionality of the MAFELL KSP series. The smart stop and adjustable fence allow the saw to be used for angle cuts from 0? to 60? in either direction. A polyethylene cable returns the KSS 400 to its starting position, so that it is ready for deployment again immediately. One-stop solution: in view of the saw's connection to the guide track, this is the world's first and only single-handed cross-cutting system. Three saws in one: the KSS 400 can be used as a cross-cut saw, a plunge-cut saw with Flippkeil riving knife, or a portable circular saw with parallel fence.