Mafell P1CC Jigsaw P1CC MaxiMAX case in the MAFELL-MAX PC 11

Mafell P1CC Jigsaw P1CC MaxiMAX case in the MAFELL-MAX PC 11
Model PC11 Mafell
Owing to its ergonomic design, with low center of pressure and soft pads, the P1 cc is comfortable to hold in every situation. In addition, sophisticated self-extraction and a clever integrated blower that conveys chips to the rear of the machine keep the mark free from chips at all times. The workplace therefore remains clean and the mark visible, even if a dust extractor is not connected.
For exact adjustment to suit the material, the speed can be varied in the range 800 to 3000 strokes/min.
The base plate of the P1 cc is as sturdy as it looks. By way of a quick-release mechanism, it remains reliably fastened to the saw at an exact right angle. The large surface area makes it easier to work close to corners and edges.
Its intelligent accessories give the P1?cc unprecedented versatility. The innovative design of the new MAFELL precision sawblade CUnex W1, in particular, facilitates extremely precise sawing.
To change the sawblade, simply release the locking lever. With just one hand, effortlessly remove the blade and insert the replacement.
The high-performance 900 W CUprex compact motor delivers consistent speeds, even when executing deep cuts. Thanks to the venturi effect, the vacuum channel integrated in the base plate guarantees outstanding dust extraction directly alongside the sawblade. The mark is kept free by blowing from one side and extracting the dust on the other.

Features of he Mafel P1CC Jisaw
More power thanks to the high-performance CUprex compact motor
Greater precision thanks to CUnex sawblade and rail compatibility
Enhanced ease of use thanks to tool-less blade changes and ideal handle positioning
Greater flexibility thanks to finest special accessories

Technical data on the Mafell P1CC Jigsaw
Nominal input 900 W
Universal-motor 230 V / 50 Hz
No-load number of strokes 800-3000 1/min
Weight 2,5 kg
Stroke height 26 mm

Other Features on the Mafell P1CC Jigsaw
Innovative CUmax sawblade clamping ensures a positive fit because of a wedge pushing against the blade. This design reliably fastens the sawblade so that it cannot be displaced.
In order not to compromise the strength of the standard sole plate, a separate tilting plate was developed for the P1 cc.
The CUnex W1 consists of two separate, soldered sawblades. The blade‘s strength and wedge shape ensure precise and square sawing, even when cutting curves.
If exactly straight cuts are required, the P1 cc can be used in conjunction with the MAFELL F guide rail.