Trend Snappy

Trend Snappy Centring Guide 7/64 Drill SNAP/DBG/7

Trend Snappy Centring Guide 7/64 Drill SNAP/DBG/7 This sprung-loaded drill bit guide is self-centering.|Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment.|They can be easily dismantled for cleaning and are supplied with a HSS drill bit. D=2.75mm (7/64 inch) Screw size=No.
Click here for more information...

Trend Snappy Centring Guide 9/64 Drill SNAP/DBG/9

Trend Snappy Centring Guide 9/64 Drill SNAP/DBG/9 This sprung-loaded drill bit guide is self-centering.|Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment.|They can be easily dismantled for cleaning and are supplied with a HSS drill bit. D=3.5mm (9/64 inch) Screw size=No.
Click here for more information...

Trend Snappy Auger Bit 16mm X 155mm SNAP/AB/16

Trend Snappy Auger Bit 16mm X 155mm SNAP/AB/16 Made from Carbon steel and precision machined.|Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury.
Click here for more information...

Trend Snappy Auger Bit 19mm X 155mm SNAP/AB/19

Trend Snappy Auger Bit 19mm X 155mm SNAP/AB/19 Made from Carbon steel and precision machined.|Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury.
Click here for more information...

Trend Snappy Auger Bit 20mm X 155mm SNAP/AB/20

Trend Snappy Auger Bit 20mm X 155mm SNAP/AB/20 Made from Carbon steel and precision machined.|Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury.
Click here for more information...

Trend Snappy Auger Bit 22mm X 155mm SNAP/AB/22

Trend Snappy Auger Bit 22mm X 155mm SNAP/AB/22 Made from Carbon steel and precision machined.|Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury.
Click here for more information...

Trend Snappy Countersink 3mm X 9.5mm TCT SNAP/CS/3mmT

Trend Snappy Countersink 3mm X 9.5mm TCT SNAP/CS/3mmT D=9.
Click here for more information...

Trend Snappy Countersink 4mm X 9.5mm TCT SNAP/CS/4mmT

Trend Snappy Countersink 4mm X 9.5mm TCT SNAP/CS/4mmT D=9.
Click here for more information...

Trend Snappy Forstner 20mm SNAP/FS/20

Trend Snappy Forstner 20mm SNAP/FS/20 High quality forged and ground carbon steel short Forstner bit for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Forstner 22mm SNAP/FS/22

Trend Snappy Forstner 22mm SNAP/FS/22 High quality forged and ground carbon steel short Forstner bit for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Forstner 24mm SNAP/FS/24

Trend Snappy Forstner 24mm SNAP/FS/24 High quality forged and ground carbon steel short Forstner bit for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Hole Saw 51mm (2) B-Metal SNAP/HS/51

Trend Snappy Hole Saw 51mm (2) B-Metal SNAP/HS/51 Diameter - 51mm
Click here for more information...

Trend Snappy Hole Saw 57mm (2- Deg) Bi-Met SNAP/HS/57

Trend Snappy Hole Saw 57mm (2- Deg) Bi-Met SNAP/HS/57 Diameter - 57mm
Click here for more information...

Trend Snappy Hole Saw 64mm (2- Deg) B-Meta SNAP/HS/64

Trend Snappy Hole Saw 64mm (2- Deg) B-Meta SNAP/HS/64 Diameter - 64mm
Click here for more information...

Trend Snappy Hole Set Plumbers 19-57mm SNAP/HS2/SET

Trend Snappy Hole Set Plumbers 19-57mm SNAP/HS2/SET Hole saw diameters available in this set are:- 19,22,28,38,44 and
Click here for more information...

Trend Snappy Tube Plug Cutter 10mm SNAP/PC/10T

Trend Snappy Tube Plug Cutter 10mm SNAP/PC/10T A direct drive shank tube type plug cutter with use with the Snappy Quick Chuck. The plug cutter creates a wooden plug or pellet to disguise screw heads.
Click here for more information...

Trend Snappy Tube Plug Cutter 12.7mm SNAP/PC/127T

Trend Snappy Tube Plug Cutter 12.7mm SNAP/PC/127T A direct drive shank tube type plug cutter with use with the Snappy Quick Chuck. The plug cutter creates a wooden plug or pellet to disguise screw heads. Diameter=12.
Click here for more information...

Trend Snappy Deg Dia Plug Cutter SNAP/PC/38

Trend Snappy Deg Dia Plug Cutter SNAP/PC/38 For cutting plugs in wood. |To suit the Snappy range of hex drill countersinks. D=?” inch (9.
Click here for more information...

Trend Snappy No 6 Four Piece Set SNAP/NO6/SET

Trend Snappy No 6 Four Piece Set SNAP/NO6/SET This set incorporates one of each of the four main lines and is designed for No.6 screw size. Screw size=No.6 Quick chuck Drill countersink No.
Click here for more information...

Trend Snappy No 10 Four Piece Set SNAP/NO10/SET

Trend Snappy No 10 Four Piece Set SNAP/NO10/SET This set incorporates one of each of the four main lines and is designed for No.10 screw size.| Screw size=No.10 Quick chuck Drill countersink No.
Click here for more information...