Powertool Direct

Panasonic 7201G 12v Impact Driver 3.5Ah NiHM

Power Mode Switching

High torque delivers for faster tightening but makes it harder to leave a clean finish. With this tool, you can switch between two torque levels, hard mode and soft mode. Hard mode offers approximately 1,060 in.lbs of torque for fastening large diameter bolt and nuts and lag bolts. Soft mode gives you approximately 711 in.lbs to reduce material surface damage and avoid stripping screw heads.

Advanced Ergonomic Design

Anti-Slip Ribbed Grip:The ribbed surface makes the grip slip-resistant even for a sweaty hand, delivering a firm grip for efficient transmission of force from the hand to the tool. Palm Fit Rear Grip Line:The fit line shape is designed to eliminate gaps between the grip and the palm of the hand. This provides even transmission of the pressing force to the entire grip. Finger Hold Sure grip Line:Our design always integrates a smooth grip line from the middle finger to the little finger. This makes it possible to hold the tool without using excessive force. Hip Line:The hip line evenly distributes the tool's weight throughout the hand. The easy to hold grip provides stability, making it easier to stay on target when tightening screws.

Spot Lighting for Screwing in Dark Areas

A white LED light with a condenser lens makes it easy to see when you are working in a dark place. The light is powered by the battery pack and linked to the trigger switch to prevent it from being left on.

Hands-Free Convenience

The smart hook can be extended to hook the tool to your belt. This allows you to have both hands free while moving around. The hook can be connected on the right or left side of the tool.

Reduce Damage and Help Prevent Sliding

The rubber guards protect the tool and material surface from damage when laid on its side as well as helping prevent slipping and dropping. The urethane cover protects the tool if dropped, and also suppresses heat transmission from the motor.

Less Time Spent Waiting and More Time Spent Working

The 3.5Ah Ni-MH battery can be fully charged in 55 minutes1 (using the EY0110B charger), which means less time spent waiting and more time spent working. Even when there isn't time for a full charge, the inverter charger features a 5-minute "Emergency Charge" that charges the pack to 15% of its capacity.

• Compact Size Length 6-27/32"
• Lightweight 3.9 lbs.
• High Power Hard mode: 1060 in.lbs.
• Soft mode: 711 in.lbs.
• Battery High capacity 3.5Ah Ni-MH
• Extra battery Included
• Charging System 55 minute (using EY0110B charger)
• Speeds Hard mode: 0-2600 rpm
• Soft mode: 0-2200 rpm
• Chuck 1/4" Hex drive
• Reversible Yes
• Electric Brake Yes
• Ergonomics Advanced ergonomic design with Anti-slip ribbed grip and balanced tool weight
• Acceptable Battery Packs Panasonic 12V
• LED Work Light White LED light with a condenser lens makes it easy to work in a dark area
• Smart Hook Yes, hook can be extended to hook the tool on your belt