Panasonic 7440LZ 14.4v Drill Driver Li-ion Now With 3.3ah Batteries

Panasonic EY7440LZ 14.4v Drill Driver Li-ion Now With 3.3ah Batteries

Panasonic launches its Lithium-Ion drill driver the EY7440. With its incredibly light weight, impressive power & run time its sure to be a fast seller. Panasonics Cobalt Lithium-Ion batteries benefit from a lower internal resistance (electrical loss) than manganese lithium , which are the most widely used lithium batteries. High electrical efficiency lets cobalt lithium batteries deliver greater output than manganese lithium batteries. Cobalt lithium batteries are also less prone to increases in temperature than manganese lithium batteries , helping to prevent shortening of service life due to heat. The overcharge prevention sensor fitted to Panasonic Lithium drills works to prevent overdischarging , discharge of the battery until voltage falls below a minimum threshold,a disadvantage of lithium ion cells. The system cuts off power to the motor before the battery voltage falls too low and flashes a warning lamp on the tools control panel to notify the user.

Another built in feature is the battery overheat protection sensor , the service life of a lithium-ion battery can be degraded if the battery becomes to hot during heavy use.A temperature sensor cuts off power to the motor before the battery temperature rises to a harmful level and flashes a warning lamp on the tools control panel to notify the user.

Specifications For The EY7440LZ

• No load speed : low 60-400rpm
• No load speed : high 200-1350rpm
• Chuck capacity 13mm
• Max torque : 26Nm
• Overall length : 191mm
• Weight (with battery) : 1.6kg

Kit Includes

• Panasonic EY7440.
• 2 x 3.3amp Lithium-Ion batteries.
• charger.
• case..