Panasonic EY7940LZ 14.4V Hammer Drill & Driver

Panasonic EY7940LZ 14.4V Hammer Drill & Driver
The EY7940LZ2S is a truly multi talented new addition. It offers precise percussion drilling (up to 25.200 Beats per minute) into masonry, bricks or tiles. In Drill Driver Mode it still achieves torque of 31.9Nm, so has same application range as EY7441LZ2S. It is Equipped with 3.1Ah (3.3Ah Typical ) Li Ion battery to reach extraordinary endurance. The built-in Overheat Protection System (OPS) reduces the likelihood of any motor burn out by ensuring that when the tool is overloaded the motor is automatically stopped.

TOUGH TOOL IP - IP56 Approval High Power with 31.9Nm for applications with high torque Overheat Protection System (OPS) for motor protection against overload Extraordinary endurance with up to 330 screws 6x60mm in softwood Hammerdrilling function for wider application range Technical Specification
Max. Torque (Nm)
Instant torque 44.1
Stalling torque 31.9
Speed at No Load (rpm)
Low 70 - 400
High 200 - 1400
Clutch Stages 18 + Drill + Hammerdrill position
Chuck Size (mm) 13.0
Blows Per Minute
Low 7500
High 27000
Panasonic EY7540 14,4V Impact Driver "TOUGH TOOL IP" with brushless motor and adjustable torque

With an innovative brushless motor system and 3 digital torque levels this compact Impact Driver offers durability and high performance. The 150Nm in ‘Hard mode’ gives enough power to fasten bolts up to M14 whilst the ‘Soft mode’ provides 27Nm to reduce material surface damage and avoid stripping screw heads at smaller diameters such as M6. The compact brushless motor design and electronic switch reduce heat build up extending working life whilst the quick release ¼” hex fitting saves front end size and weight improving operator comfort and balance in operation.

Technical Specification

Speed at No Load (rpm)
Low 0-1000
Medium 0-1400
High 0-2300
Max. Torque (Nm)
High 150.0
Clutch Stages 3 stages for speed and impact energy
Chuck Size (mm) 1/4 inch hex drive
Impact / Min 3000.0
Blows (bpM)
High 0-3000
Medium 0-2800
Low 0-2000