Proxxon FF230 MICRO Miller FF 2300

Proxxon FF230 MICRO Miller FF 2300
A small system used to mill, drill and countersink of steel, casting, aluminium, brass and plastic.
The headstock swivels through 360° indicated on a scale. Adjustment via hand wheel and dial (1 revolution = 1 mm, 1 division = 0.05 mm). Acts additionally as fine feed when milling or precise drilling. Quill and headstock may be locked in position, essential when milling. The powerful permanent magnet motor effects drive via a poly-v belt, yielding high torques, especially at lower speeds. Collets of 6, 8 and 10 mm are included. The solid steel table is T-slotted to the MICROMOT norm of 12 x 6 x 5 mm.
Technical Data:
220 - 240 V. 140 W. 50/60 Hz. Spindle speeds: 280 - 550 - 870 - 1,200 - 1,500 and 2,200 rpm are achieved by poly-v belt drive. Quill travel 30 mm. Column 35 x 400 mm. Table 270 x 80 mm. Travel X (cross) 170 mm, Y (length) 65 mm. Size 180 x 130 mm. Total height approx. 500 mm. Weight approx. 17.0 kg.
Complete with KT 230.
NO 24 108
Important:
For clean milling it is recommended to headstock in position. The FF 230's lock levers achieve this effortlessly.
Hand wheel for height adjustment and optional as fine feed for use when milling or precise drilling.
Poly-V belt drive for 6 spindle speeds 280 - 2,500 rpm.
Assembled fine feed, work piece, clamp set and cutters not included.
Hand wheels with adjustable scale (1 revolution = 1 mm, 1 division = 0.05 mm).