Powertool Direct

A steel router table that will not sag over time as many laminate tables will.
16' x 24' plate is hand tuned to have a slight upward curve specially set so that the weight of the router cannot deform the router table to concave.
Top will always be slightly convex with the highest point adjacent to the bit, so the depth of cut will always be as set.
3/16' top can be used with magnetic accessories and any router bit can be used without removing the router's base plate.
Quick-change clamps (adjust to any base shape) allow router to be installed or removed in 30 seconds or less.
Prop up or flip plate to change bits.
Flush inserts securely lock into the 3-5/8' opening with a simple cam action using the included pin wrench. Guaranteed to meet a tolerance of +0.000'/-0.004'.
Template inserts (inside diameter 9/32', 1/2' or 3/4', outside diameter 1/8' larger) are used as guide bushings for pattern tracing.
Zero-clearance inserts can be drilled to fit any bit or a bit can be plunged through them.
1-3/4' counterbore insert accepts 1-3/4' brass template guides and ring nuts.
Includes steel table top, alignment pin, pivot posts, two inserts (with 1/2' and 1-1/2' holes), clamp assembly, pin wrench, 70-page manual and 100-minute video.
Many Veritas accessories such as a fence, hold-down, right-angle sled, magnetic dust chute and stands are available.
Patented.