Powertool Direct

Scheppach ts2500ci Including Sliding Table
Economic sawing excellence – the new scheppach ts 2500 ci circular sawbench with cast iron table.

Sawing efficiency demands accuracy and stability. Both are incorporated into the new scheppach ts 2500 ci circular sawbench which now comes with cast iron saw table as standard.

With an impressive 87 mm depth of cut – backed up with a 5.2 HP motor (3.5 HP single phase) and a constant cutting speed of 54m/second for splinter free cutting, sawing performance doesn't come any better than this from an economy range sawbench.

If you decide to increase the cutting capacity of your sawbench you can choose the same high quality optional table width & length extensions and sliding table carriage that are available for the precision ts 4010 ci professional circular sawbench. Therefore whether you need only the basic machine or you choose to enhance its performance with “add-ons” you know that with the scheppach ts2500 ci, you are getting the very best that money can buy.

Table slots to both left and right of the sawblade accept the mitre gauge which gives 0–60 degree settings. Dust extraction from the crown guard as well as the main sawdust chute is included as part of the standard equipment, thus meeting all the demands of those who are as concerned with health issues as they are about cutting performance.

Table width and length extensions plus a choice of two sliding carriages are available as optional attachments allowing a cutting capacity of up to 800 mm or 1,400 mm in front of the sawblade. When fitted with the folding table width extension, an 1,100 mm cutting capacity to the right of the sawblade can be achieved.

To complete the versatility of this popular machine scheppach now offer an expanding grooving cutter for trenching, grooving and rebating etc as part of the accessory range. A special SUVA guard is required for all hidden cuts.

If workshop space is a problem then the option of a wheel base will allow you to move the machine single handed.

Standard equipment On The TS2500ci
Cast iron table plate, precision ripping fence with turning fence rail, crosscut/mitre gauge, sawblade guard, suction hose for top sawblade guard, suction connector for dust free working, tct sawblade, push stick, push grip, tool for changing the sawblade.

Technical data
Dimensions (L / W / H) 680mm x 1,100mm x 1,110mm
Table size 800mm x 680mm
Table height 850mm
Sliding carriage
Sawblade Ø / teeth 270mm Ø / 24 t
Height adjustment – 0–87mm
Sawblade Ø
Height adjustment
Tilting range 45°
Speed 3,800rpm
Cutting speed 50m/sec
Ripping fence length 800mm
Angle fence 2 x 60°
Suction connector Ø 100mm
Weight approx. 120kgs

Cutting data
Cutting depth at 90° 87mm
Cutting depth at 45° 64mm
Cutting width or depth
With ripping fence 405mm
With table width extn. 1,100mm
With angle fence mm 260mm
With sliding carriage 800/1,400mm

Motor 230 V /50 Hz
Input 2.6kw (3.5hp)
Output 2.0kw (2.7hp)
Speed 2,740rpm
Brake yes
Motor protection yes
Switch/plug unit with no-volt release yes

Order No. 5301 0903