Tormek AN04 Cabinet Makers Apron With shoulder support, no pressure on your neck. Extra long tapes for all sizes. Special pockets with covers for your calculator, note pad, folding square, calliper and cellphone. 100 % cotton.
Click here for more information...
£26.38 exVAT
£30.34 incVAT
Benefits compared with our existing ADV-50D and other tools on the market
Easy feeding across the stone
You can conveniently and without pressing with your thumbs feed the diamond cutter across the stone. You achieve an even feeding by alternately turning the two knobs with both your hands. The feed can be made in both directions.
Click here for more information...
£43.62 exVAT
£50.16 incVAT
£33.85 exVAT
£38.93 incVAT
£20.72 exVAT
£23.83 incVAT
£16.94 exVAT
£19.48 incVAT
£11.28 exVAT
£12.97 incVAT
£27.45 exVAT
£31.57 incVAT
£10.50 exVAT
£12.08 incVAT
£46.05 exVAT
£52.96 incVAT
£5.17 exVAT
£5.95 incVAT
£14.55 exVAT
£16.74 incVAT
£9.66 exVAT
£11.11 incVAT
£22.60 exVAT
£25.99 incVAT
Design Of The SVH320
The attachment comprises support (1),
blade holder (2)
and allen key (3).
In this attachment the tool is guided precisely and ground flat along its whole length to a pre-set fixed depth.
This is not the case with the other Tormek jigs, where your hand decides where the grinding occurs and the depth of grinding.
Click here for more information...
£100.22 exVAT
£115.25 incVAT
£8.05 exVAT
£9.26 incVAT
Products: 56
Pages:
(1) 2 3
The key word when sharpening the Tormek way is repeatability. The tools are guided in jigs you remove only a minute fraction of the steel at each sharpening, which makes it fast. An extra benefit is that your tools last longer.
You can shape the tool exactly to your needs. Even such complicated shapes as fingernail turning gouges, spoon carving gouges and oval skew chisels with a radiused edge are easily sharpened. Once the shape is created, you can resharpen the edge in less than a minute.
The water cooled slow speed grindstone is in harmony with the physical laws governing the steel tool the edge does not overheat and lose its hardness.
The water lubricated grindstone and the final power honing on the leather honing wheel work in the same way as benchstone sharpening except that the motorized process speeds up the work. The leather wheel is impregnated with honing compound and polishes the edge to a razor sharpness.
No grinding dust is produced to pollute the air. The steel particles are deposited into the water trough.
The Tormek method is safe. At the low speed, you can fully control the sharpening. Since no sparks are produced, there is no risk to your eyes and you can safely use the machine in areas of high fire risk.