Trend Professional HSS Cutters

Trend CB78-14HSS Counterbore 1/4 diameter x 7/8 DC/S CB78-14HSS

Trend CB78-14HSS Counterbore 1/4 diameter x 7/8 DC/S CB78-14HSS The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals.
Click here for more information...

Trend CB34-38HSS Counterbore 3/8 diameter x 3/4 DC/S CB34-38HSS

Trend CB34-38HSS Counterbore 3/8 diameter x 3/4 DC/S CB34-38HSS The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals.
Click here for more information...

Trend CB1-38HSS Counterbore 3/8 diameter x 1 DC/S CB1-38HSS

Trend CB1-38HSS Counterbore 3/8 diameter x 1 DC/S CB1-38HSS The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals.
Click here for more information...

Trend 4001/32HSS Dowel drill 3.2mm diameter x 39mm 4001/32HSS

Trend 4001/32HSS Dowel drill 3.2mm diameter x 39mm 4001/32HSS These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board.
Click here for more information...

Trend 4001/5HSS Dowel drill 5mm diameter x 52mm 4001/5HSS

Trend 4001/5HSS Dowel drill 5mm diameter x 52mm 4001/5HSS These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board.
Click here for more information...

Trend 4001/55HSS Dowel drill 5.5mm diameter x 60mm 4001/55HSS

Trend 4001/55HSS Dowel drill 5.5mm diameter x 60mm 4001/55HSS These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board.
Click here for more information...

Trend 1306/38WS Saw forstner 3/8 inch diameter 1306/38WS

Trend 1306/38WS Saw forstner 3/8 inch diameter 1306/38WS Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and acolloping operations.
Click here for more information...

Trend 1307/78WS Saw forstner 7/8 inch diameter 1307/78WS

Trend 1307/78WS Saw forstner 7/8 inch diameter 1307/78WS Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and acolloping operations.
Click here for more information...

Trend 1306/12WS Saw forstner 1/2 inch diameter 1306/12WS

Trend 1306/12WS Saw forstner 1/2 inch diameter 1306/12WS Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and acolloping operations.
Click here for more information...

Trend 1307/178WS Saw forstner 1 7/8 inch diameter 1307/178WS

Trend 1307/178WS Saw forstner 1 7/8 inch diameter 1307/178WS Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and acolloping operations.
Click here for more information...

Trend 1306/138WS Saw forstner 1 3/8 inch diameter 1306/138WS

Trend 1306/138WS Saw forstner 1 3/8 inch diameter 1306/138WS Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and acolloping operations.
Click here for more information...

Trend 1307/2WS Saw forstner 2 inch diameter 1307/2WS

Trend 1307/2WS Saw forstner 2 inch diameter 1307/2WS Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and acolloping operations.
Click here for more information...

Trend 2214/138WS Plug maker match 1 3/8 inch diameter 2214/138WS

Trend 2214/138WS Plug maker match 1 3/8 inch diameter 2214/138WS Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.|These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to bed of drilling machine.
Click here for more information...

Trend 2214/112WS Plug maker match 1 1/2 inch diameter 2214/112WS

Trend 2214/112WS Plug maker match 1 1/2 inch diameter 2214/112WS Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.|These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to bed of drilling machine.
Click here for more information...

Trend 2214/158WS Plug maker match 1 5/8 inch diameter 2214/158WS

Trend 2214/158WS Plug maker match 1 5/8 inch diameter 2214/158WS Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.|These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to bed of drilling machine.
Click here for more information...

Trend 620/9WS Countersink 9mm diameter 620/9WS

Trend 620/9WS Countersink 9mm diameter 620/9WS These countersinks, produced from the best grade carbon steel, leaves a clean cut finish by virtue of their multi-tooth deep ground gullets.|Fits metric drills from 3mm to 12mm inclusive.|Not suitable for abrasive materials or metal. Drill bit not included.
Click here for more information...

Trend 501/18HSS Twist drill 1/8 inch diameter 501/18HSS

Trend 501/18HSS Twist drill 1/8 inch diameter 501/18HSS Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work.
Click here for more information...

Trend 501/532HSS Twist drill 5/32 inch diameter 501/532HSS

Trend 501/532HSS Twist drill 5/32 inch diameter 501/532HSS Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work.
Click here for more information...

Trend Machinery Step/Enlarg 24mm Dia X 63mm Cut 38/6X

D=24mm d=6mm C=63mm Shank Diameter=?” inch
Click here for more information...

Trend 24/80X1/4TC Plug maker 9.5 mm diameter 24/80X1/4TC

Trend 24/80X1/4TC Plug maker 9.5 mm diameter 24/80X1/4TC These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools.|Use at recommended speeds of 1000-20000 RPM.
Click here for more information...