Trend Professional TC Cutters

Trend CB38-316TC Counterbore 3/16 diameter x 3/8 DC/S CB38-316TC

Trend CB38-316TC Counterbore 3/16 diameter x 3/8 DC/S CB38-316TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only.
Click here for more information...

Trend CB12-316TC Counterbore 3/16 diameter x 1/2 DC/S CB12-316TC

Trend CB12-316TC Counterbore 3/16 diameter x 1/2 DC/S CB12-316TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only.
Click here for more information...

Trend CB118-12TC Counterbore 1/2 diameter x 1 1/8 DC/S CB118-12TC

Trend CB118-12TC Counterbore 1/2 diameter x 1 1/8 DC/S CB118-12TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only.
Click here for more information...

Trend 6200/4TC Adjustable countersink 1/2 inch diameter 6200/4TC

Trend 6200/4TC Adjustable countersink 1/2 inch diameter 6200/4TC They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only.
Click here for more information...

Trend 4001/65TC Dowel drill 6.5mm diameter x 42mm 4001/65TC

Trend 4001/65TC Dowel drill 6.5mm diameter x 42mm 4001/65TC These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board. Have tapered spurs.
Click here for more information...

Trend Router Cutters Multi-Boring Dowel Drill 6mm Dia 4109/6L

Trend Router Cutters Multi-Boring Dowel Drill 6mm Dia 4109/6LTC D=6mm C=25mm Overall length=57mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Multi-Boring Dowel Drill 10mm Dia 4119/10

Trend Router Cutters Multi-Boring Dowel Drill 10mm Dia 4119/10LTC D=10mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Multi-Boring Dowel Drill 10mm Dia 4119/10

Trend Router Cutters Multi-Boring Dowel Drill 10mm Dia 4119/10TC D=10mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Drill 5mm X 70mm Ol LH Pack Of 10 4119/5L

Trend Router Cutters Drill 5mm X 70mm Ol LH Pack Of 10 4119/5LTC/10 D=5mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Drill 5mm X 70mm Ol RH Pack Of 10 4119/5R

Trend Router Cutters Drill 5mm X 70mm Ol RH Pack Of 10 4119/5RTC/10 D=5mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Drill 16mm X 57mm Ol RH Pack Of 10 4109/16

Trend Router Cutters Drill 16mm X 57mm Ol RH Pack Of 10 4109/16RTC/1 D=16mm C=25mm Overall length=57mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Drill 12mm X 70mm Ol LH Pack Of 10 4119/12

Trend Router Cutters Drill 12mm X 70mm Ol LH Pack Of 10 4119/12LTC/1 D=12mm C=35mm Overall length=70mm Shank Diameter=10mm
Click here for more information...

Trend 1004/12TC Lip and spur two wing bit 12mm diameter 1004/12TC

Trend 1004/12TC Lip and spur two wing bit 12mm diameter 1004/12TC These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole.
Click here for more information...

Trend 1004/22TC Lip and spur two wing bit 22mm diameter 1004/22TC

Trend 1004/22TC Lip and spur two wing bit 22mm diameter 1004/22TC These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole.
Click here for more information...

Trend Router Cutters Multi-Bore Hinge Sink Bit 35mm Dia 1209/35

Trend Router Cutters Multi-Bore Hinge Sink Bit 35mm Dia 1209/35TC D=35mm OL=57mm Shank Diameter=10mm
Click here for more information...

Trend 501/5LTC Drill 5mm diameter LH 501/5LTC

Trend 501/5LTC Drill 5mm diameter LH 501/5LTC Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Have a Solid Carbide ends, brazed in and ground to give maximum clearance. Have a 60 degree taper point and are recommended for hard or abrasive materials.
Click here for more information...

Trend 501/12TC Twist drill 12mm diameter 501/12TC

Trend 501/12TC Twist drill 12mm diameter 501/12TC Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Have a Solid Carbide ends, brazed in and ground to give maximum clearance. Have a 60 degree taper point and are recommended for hard or abrasive materials.
Click here for more information...

Trend Machinery Dowel Drill 10mm Dia X 35mm DL

This slow spiral TCT drill can be used in drilling machines or plunge routers.|Use between 1000 and 22000 RPM.|Is suitable for use in the DeWalt 600mm Dovetail Jig.|Suitable for use in the Elu/DeWalt 610mm Dovetail Jig.| D=10mm Overall length=70mm Shank Diameter=¼” inch
Click here for more information...

Trend 104/15X3/8TC Hinge sinking 15mm diameter 104/15X3/8TC

Trend 104/15X3/8TC Hinge sinking 15mm diameter 104/15X3/8TC These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes.|Use with pillar drills only.
Click here for more information...

Trend 24/10X1/4TC Plug maker 12 mm diameter 24/10X1/4TC

Trend 24/10X1/4TC Plug maker 12 mm diameter 24/10X1/4TC These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools.|Use at recommended speeds of 1000-20000 RPM.
Click here for more information...