Trend H/JIG/75 Hinge Jig Plastic Cut 75mm Two Part

Trend H/JIG/75 Hinge Jig Plastic Cut 75mm Two Part
Trend H/JIG/75 Hinge Jig Plastic 75mm Two Part
A light duty hinge jig for routing 75mm hinge recesses in internal doors & linings.
Hard wearing template in 12mm laminate. v Two part, splits into two lengths withh dovetail joint.
One set up for door and frame. No need to adjust for repeated doors.
Three pre-set apertures 6inch down and 9inch up the middle.
For internal doors 15mm to 51mm thick with seperate (plant on) stops.
Swivel end plate for 3mm gap to head of door.
Pin park in jig body.
Includes three 10mm diameter plastic pins with tapered shoulder for tight fit, two bradawls and 16 mm guide bush.
Unibase may be needed.
Patent No. GB2285410.
T4EK router requires a ref. UNIBASE.

Specifications for H/JIG/75
Hinge size
Length 75mm
Width min. 21.65mm
Door size possible
Height min 6' 5"" (1955mm)
Height max. 6' 10"" (2100mm)
Thickness min. 25mm

Includes With H/JIG/75
2 x Bradawls with spacer
1 x 16mm Guide bush
3 x Pins

Product Reference
H/JIG/75