Trend Straight cutter

Trend Router Cutters Two Flute 12.7mm Dia X 37mm Cut 3/82X1/

Two flutes for clean finish.|Suitable for plunge routers.| D=1/2 inch D=12.7mm C=37mm Shank Diameter=1/2 inch
Click here for more information...

Trend 3/81X1/2HSS Two flute router cutter 12.7 mm diameter 3/81X1/2HSS

Trend 3/81X1/2HSS Two flute router cutter 12.7 mm diameter 3/81X1/2HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend Router Cutters Two Flute 9.5mm Dia X 32mm Cut 3/51X1/

Two flutes for clean finish.|Suitable for plunge routers.| D=3/8 inch D=9.5mm C=32mm Shank Diameter=1/2 inch
Click here for more information...

Trend 4/5X1/4HSS Two flute router cutter 19 mm diameter 4/5X1/4HSS

Trend 4/5X1/4HSS Two flute router cutter 19 mm diameter 4/5X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend Router Cutters Two Flute 16mm Dia X 19mm 253307 4/2X1/4

Two flutes for clean finish.|Suitable for plunge routers.| D=3/8 inch D=16mm C=19mm Shank Diameter=1/4 inch
Click here for more information...

Trend Router Cutters Two Flute 12.7 Dia X 19mm 253305 3/80X1

Two flutes for clean finish.|Suitable for plunge routers.| D=1/2 inch D=12.7mm C=19mm Shank Diameter=1/4 inch
Click here for more information...

Trend 3/50X1/4HSS Two flute router cutter 9.5 mm diameter 3/50X1/4HSS

Trend 3/50X1/4HSS Two flute router cutter 9.5 mm diameter 3/50X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 3/20LX1/4HSS Pocket router cutter 6.3 mm diameter 3/20LX1/4HSS

Trend 3/20LX1/4HSS Pocket router cutter 6.3 mm diameter 3/20LX1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 3/6X1/4HSS Two flute router cutter 10 mm diameter 3/6X1/4HSS

Trend 3/6X1/4HSS Two flute router cutter 10 mm diameter 3/6X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend Router Cutters Two Flute 12mm Dia X 19mm 257031 3/8X1/4

Two flutes for clean finish.|Suitable for plunge routers.| D=15/32 inch D=12mm C=19mm Shank Diameter=1/4 inch
Click here for more information...

Trend 2/20LX1/4HSS Pocket router cutter 3.2 mm diameter 2/20LX1/4HSS

Trend 2/20LX1/4HSS Pocket router cutter 3.2 mm diameter 2/20LX1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 3/4X1/4HSS Two flute router cutter 8 mm diameter 3/4X1/4HSS

Trend 3/4X1/4HSS Two flute router cutter 8 mm diameter 3/4X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 3/1X1/4HSS Two flute router cutter 5 mm diameter 3/1X1/4HSS

Trend 3/1X1/4HSS Two flute router cutter 5 mm diameter 3/1X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 2/5X1/4HSS Single flute router cutter 5.5 mm diameter 2/5X1/4HSS

Trend 2/5X1/4HSS Single flute router cutter 5.5 mm diameter 2/5X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 3/20X1/4HSS Two flute router cutter 6.3 mm diameter 3/20X1/4HSS

Trend 3/20X1/4HSS Two flute router cutter 6.3 mm diameter 3/20X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 2/2X1/4HSS Single flute router cutter 3.2 mm diameter 2/2X1/4HSS

Trend 2/2X1/4HSS Single flute router cutter 3.2 mm diameter 2/2X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 3/2X1/4HSS Two flute router cutter 6 mm diameter 3/2X1/4HSS

Trend 3/2X1/4HSS Two flute router cutter 6 mm diameter 3/2X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 2/10X1/4HSS Single flute router cutter 2 mm diameter 2/10X1/4HSS

Trend 2/10X1/4HSS Single flute router cutter 2 mm diameter 2/10X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 2/3X1/4HSS Single flute router cutter 4 mm diameter 2/3X1/4HSS

Trend 2/3X1/4HSS Single flute router cutter 4 mm diameter 2/3X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend Router Cutters Single Flute 3.2 Dia X 11mm 253302 2/20X1/

One flute.|Eccentric single flute cutter.|Cutter is chosen for fast free cutting, when cutting speed takes preference over finish.|Must not be used in eccentric chucks.
Click here for more information...