Trend Bevel

Trend 46/106X1/2TC Bevel router cutter 46/106X1/2TC

Trend 46/106X1/2TC Bevel router cutter 46/106X1/2TC Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component.
Click here for more information...

Trend 46/107X1/2TC Bevel router cutter 46/107X1/2TC

Trend 46/107X1/2TC Bevel router cutter 46/107X1/2TC Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component.
Click here for more information...

Trend 46/105X1/2TC Bevel router cutter 46/105X1/2TC

Trend 46/105X1/2TC Bevel router cutter 46/105X1/2TC Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component.
Click here for more information...

Trend 46/104X1/2TC Bevel router cutter 46/104X1/2TC

Trend 46/104X1/2TC Bevel router cutter 46/104X1/2TC Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component.
Click here for more information...

Trend 90/40X1/2TC Bevel router cutter hob router cutter 90/40X1/2TC

Trend 90/40X1/2TC Bevel router cutter hob router cutter 90/40X1/2TC Creates the aperture cutout for the fitting of hob units.
Click here for more information...

Trend 90/40X12MMTC Bevel router cutter hob router cutter 90/40X12MMTC

Trend 90/40X12MMTC Bevel router cutter hob router cutter 90/40X12MMTC Creates the aperture cutout for the fitting of hob units.
Click here for more information...

Trend 46/103X1/2TC Bevel router cutter 46/103X1/2TC

Trend 46/103X1/2TC Bevel router cutter 46/103X1/2TC Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component.
Click here for more information...

Trend 46/6BX1/4TC Bevel trim router cutter 46/6BX1/4TC

Trend 46/6BX1/4TC Bevel trim router cutter 46/6BX1/4TC Cut a wider edge line, at an angle of 45 degrees.|A 16mm bearing is supplied as standard. |A larger 19mm bearing will spread the wear of the cutting edges.
Click here for more information...

Trend 46/6CX1/4TC Bevel trim router cutter 46/6CX1/4TC

Trend 46/6CX1/4TC Bevel trim router cutter 46/6CX1/4TC Cut a wider edge line, at an angle of 30 degrees.|A 16mm bearing is supplied as standard. |A larger 19mm bearing will spread the wear of the cutting edges.
Click here for more information...

Trend 11/17X1/4TC Bevel router cutter 11/17X1/4TC

Trend 11/17X1/4TC Bevel router cutter 11/17X1/4TC Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. Ideal for use by wood turners with smaller routers to create staves on 25mm stock. For full bevels, template should be fitted to component.
Click here for more information...

Trend 46/6AX1/4TC Bevel trim router cutter 46/6AX1/4TC

Trend 46/6AX1/4TC Bevel trim router cutter 46/6AX1/4TC Cut a wider edge line, at an angle of 60 degrees.|A 16mm bearing is supplied as standard. |A larger 19mm bearing will spread the wear of the cutting edges.
Click here for more information...

Trend 47/6CX1/4TC Bevel trim router cutter 47/6CX1/4TC

Trend 47/6CX1/4TC Bevel trim router cutter 47/6CX1/4TC Three bevel cutters for edging . For trimming laminate, when a wider edge line is preferred on the finished edge. Supplied in 80 degree, 60 degree and 30 degree versions of bevel angle. No bottom cut.
Click here for more information...

Trend 46/3X1/4TC Bevel trimmer 20 mm diameter 14mm length 46/3X1/4TC

Trend 46/3X1/4TC Bevel trimmer 20 mm diameter 14mm length 46/3X1/4TC Cut a wider edge line, at an angle of 80 degrees. |A 16mm bearing is supplied as standard. |A larger 19mm bearing will spread the wear of the cutting edges.
Click here for more information...

Trend 47/6AX1/4TC Bevel trim router cutter 47/6AX1/4TC

Trend 47/6AX1/4TC Bevel trim router cutter 47/6AX1/4TC Three bevel cutters for edging . For trimming laminate, when a wider edge line is preferred on the finished edge. Supplied in 80 degree, 60 degree and 30 degree versions of bevel angle. No bottom cut.
Click here for more information...

Trend 47/3X1/4TC Bevel trim router cutter 47/3X1/4TC

Trend 47/3X1/4TC Bevel trim router cutter 47/3X1/4TC Three bevel cutters for edging . For trimming laminate, when a wider edge line is preferred on the finished edge. Supplied in 80 degree, 60 degree and 30 degree versions of bevel angle. No bottom cut.
Click here for more information...

Trend 46/6DX1/4TC Guided specialist bevel trim router cutter 46/6DX1/4TC

Trend 46/6DX1/4TC Guided specialist bevel trim router cutter 46/6DX1/4TC Cut a wider edge line, at an angle of 82 degrees.|A 16mm bearing is supplied as standard. |A larger 19mm bearing will spread the wear of the cutting edges. Has a gap between the tips and bearing, to reduce adhesive build-up.
Click here for more information...

Trend S48/39X1/4STC Economy trimmer 6.3 mm diameter 10mm length S48/39X1/4STC

Trend S48/39X1/4STC Economy trimmer 6.3 mm diameter 10mm length S48/39X1/4STC Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41. Ref. S48/42 is for trimming on a rebate. The guide length is 3mm. Ref. S48/39 is a shorter version of Ref. S48/40.
Click here for more information...

Trend S47/72X1/4STC Economy V groove S47/72X1/4STC

Trend S47/72X1/4STC Economy V groove S47/72X1/4STC Cutter for trimming and bevelling timber, lippings and plastic laminate.|Can only be used in laminate trimming routers, or when straight fence guides are introduced.|Solid tungsten carbide economy cutter.|For use on short runs at 90 degrees or 45 degrees.|Will trim and bevel by changing cutter
Click here for more information...

Trend S47/71X1/4STC Economy bevel trimmer 6.3 mm diameter S47/71X1/4STC

Trend S47/71X1/4STC Economy bevel trimmer 6.3 mm diameter S47/71X1/4STC Solid Tungsten Carbide economy cutter. For use on short runs at 90 degree or 60 degree with Ref. S47/70, at 90 degree or 83 degrees with Ref. S47/71 and at 90 degree or 45 degree with Ref. S47/72. Will trim and bevel by changing cutter height.
Click here for more information...