Trend Trimmer

Trend 46/20X1/2TC Guided trimmer 19.1 mm diameter 25mm length 46/20X1/2TC

Trend 46/20X1/2TC Guided trimmer 19.1 mm diameter 25mm length 46/20X1/2TC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend 46/20X3/8TC Guided trimmer 19.1 mm diameter 25mm length 46/20X3/8TC

Trend 46/20X3/8TC Guided trimmer 19.1 mm diameter 25mm length 46/20X3/8TC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend 46/21X3/8TC Trimming router cutter 18.2 mm diameter 46/21X3/8TC

Trend 46/21X3/8TC Trimming router cutter 18.2 mm diameter 46/21X3/8TC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend 46/22X3/8TC Trimming router cutter 18.2 mm diameter 46/22X3/8TC

Trend 46/22X3/8TC Trimming router cutter 18.2 mm diameter 46/22X3/8TC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend 46/07X1/4TC Guided trimmer 6.3 mm diameter 25.4mm length 46/07X1/4TC

Trend 46/07X1/4TC Guided trimmer 6.3 mm diameter 25.4mm length 46/07X1/4TC Two flute mini-trim with guide bearing will profile intricate shapes. Max. 2.0mm trimming.
Click here for more information...

Trend S48/41X1/4STC Economy trimmer 6.3 mm diameter 6mm length S48/41X1/4STC

Trend S48/41X1/4STC Economy trimmer 6.3 mm diameter 6mm length S48/41X1/4STC Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41. Ref. S48/42 is for trimming on a rebate. The guide length is 3mm. Ref. S48/39 is a shorter version of Ref. S48/40.
Click here for more information...

Trend S48/42X1/4STC Economy flush and trim router cutter S48/42X1/4STC

Trend S48/42X1/4STC Economy flush and trim router cutter S48/42X1/4STC Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41. Ref. S48/42 is for trimming on a rebate. The guide length is 3mm. Ref. S48/39 is a shorter version of Ref. S48/40.
Click here for more information...

Trend S48/40X1/4STC Economy trimmer 6.3 mm diameter 10mm length S48/40X1/4STC

Trend S48/40X1/4STC Economy trimmer 6.3 mm diameter 10mm length S48/40X1/4STC Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41. Ref. S48/42 is for trimming on a rebate. The guide length is 3mm. Ref. S48/39 is a shorter version of Ref. S48/40.
Click here for more information...

Trend 47/2X1/4TC Trimmer 18 mm diameter 12mm length 47/2X1/4TC

Trend 47/2X1/4TC Trimmer 18 mm diameter 12mm length 47/2X1/4TC For trimming the lipping of plastic overlay, and for rebating and |machining wood, Duralium and plastics. |Tungsten Carbide Tipped.|Use at speed 12000 - 24000 RPM.
Click here for more information...

Trend 47/20X1/4TC Trimmer 20 mm diameter 13mm length 47/20X1/4TC

Trend 47/20X1/4TC Trimmer 20 mm diameter 13mm length 47/20X1/4TC For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. |Tungsten Carbide Tipped.|Use at speed 12000 - 24000 RPM.
Click here for more information...

Trend 46/201X1/4TC Low profile trimmer 19.1 mm diameter 25.0mm length 46/201X1/4TC

Trend 46/201X1/4TC Low profile trimmer 19.1 mm diameter 25.0mm length 46/201X1/4TC Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers.
Click here for more information...

Trend 46/20X1/4TC Guided trimmer 19.1 mm diameter 25mm length 46/20X1/4TC

Trend 46/20X1/4TC Guided trimmer 19.1 mm diameter 25mm length 46/20X1/4TC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend 46/20X8MMTC Guided trimmer 19.1 mm diameter 25mm length 46/20X8MMTC

Trend 46/20X8MMTC Guided trimmer 19.1 mm diameter 25mm length 46/20X8MMTC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend 46/210X1/2TC Guided 90 degree trimmer 12.7 mm diameter 38.1mm length 46/210X1/2TC

Trend 46/210X1/2TC Guided 90 degree trimmer 12.7 mm diameter 38.1mm length 46/210X1/2TC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend 46/210X12MMTC Guided 90 degree trimmer 12.7 mm diameter 38.1mm length 46/210X12MMTC

Trend 46/210X12MMTC Guided 90 degree trimmer 12.7 mm diameter 38.1mm length 46/210X12MMTC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend 46/82X12MMTC Trimming router cutter 12.7 mm diameter 46/82X12MMTC

Trend 46/82X12MMTC Trimming router cutter 12.7 mm diameter 46/82X12MMTC Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Ref 46/82 has twin bearings for stability by increasing the bearing surface and is an industrial profiling tool for longer runs of work.
Click here for more information...

Trend 46/21X8MMTC Trimming router cutter 18.2 mm diameter 46/21X8MMTC

Trend 46/21X8MMTC Trimming router cutter 18.2 mm diameter 46/21X8MMTC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend 46/82X1/2TC Trimming router cutter 12.7 mm diameter 46/82X1/2TC

Trend 46/82X1/2TC Trimming router cutter 12.7 mm diameter 46/82X1/2TC Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Ref 46/82 has twin bearings for stability by increasing the bearing surface and is an industrial profiling tool for longer runs of work.
Click here for more information...

Trend 46/22X1/2TC Trimming router cutter 18.2 mm diameter 46/22X1/2TC

Trend 46/22X1/2TC Trimming router cutter 18.2 mm diameter 46/22X1/2TC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...

Trend 46/22X12MMTC Trimming router cutter 18.2 mm diameter 46/22X12MMTC

Trend 46/22X12MMTC Trimming router cutter 18.2 mm diameter 46/22X12MMTC Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling.
Click here for more information...