CraftPro TC Cutters

Powertool Direct » Trend » Woodworking » Woodworking from T… » Router Cutter Rang… » Trend CraftPro TC Cutters

> Trend Aquamac
> Trend Arbor
> Trend Bead
> Trend Bevel
> Trend Biscuit-jointer
> Trend Block
> Trend Cavetto
> Trend Chamfer
> Trend Classic
> Trend Corner
> Trend Corner bead
> Trend Cutter Sets
> Trend Double trimmer
> Trend Dovetail
> Trend Dowel
> Trend Elegant
> Trend Finger
> Trend Groover
> Trend Hand

> Trend Handrail
> Trend Hinge Sinker
> Trend Keyhole
> Trend KiTChen Fitters
> Trend Mitre
> Trend Mortise
> Trend Off set
> Trend Ogee
> Trend Overlap
> Trend Ovolos
> Trend Panel Door
> Trend Panel mould
> Trend Panel Raiser
> Trend Panel veining
> Trend Panelling
> Trend Panelling radius
> Trend Pierce
> Trend Profile Scribe
> Trend Profile Scriber

> Trend Profiler
> Trend Radius
> Trend Raised panel
> Trend Rebater
> Trend Roman
> Trend Rounding
> Trend Routaseal
> Trend Sash
> Trend Slotseal
> Trend Slotter
> Trend Staff
> Trend Straight cutter
> Trend Template
> Trend Three Flute
> Trend Thumb
> Trend Tongue
> Trend Trimmer
> Trend Weatherseal

Trend Machinery Corner Bead 4.8mm Rad X 26mm Dia C130X1/4TC

Attractive edge moulds. A full corner bead |can be produced by making a second pass at 90 degrees.| D=26mm D2=22mm C=16mm B=15.9mm R=4.
Click here for more information...

£24.26 exVAT
£27.89 incVAT

Trend Machinery Biscuit Jointer Set 37.2mm Dia C152X1/2TC

D=37.2mm Kerf=4.
Click here for more information...

£22.55 exVAT
£25.94 incVAT

Trend Machinery Biscuit Jointer Set 37.2mm Dia C152X1/4TC

D=37.2mm Kerf=4.
Click here for more information...

£22.55 exVAT
£25.94 incVAT

Trend Machinery Self G/Chamfer 30 Deg X 7.0mm Cut C139X1/4TC

Self-guiding chamfer/bevel cutter.|Bearing follows the board beneath. C=7mm B=9.
Click here for more information...

£18.30 exVAT
£21.04 incVAT

Trend Machinery Dovetail A=104 Deg X 12.7mm Dia C041X1/4TC

This dovetail cutter produces a tight reliable joint for drawers, boxes eTC.| D=12.7mm C=12.
Click here for more information...

£9.36 exVAT
£10.77 incVAT

Trend Machinery Template/Profile 12.7mm Dia C121X1/4TC

This trimmer with a shank mounted bearing, are ideal for template guidance.|Use for rebating and trimming edges only.|Extra care must be taken to avoid cutter breakage.| D=12.7mm C=25.
Click here for more information...

£11.49 exVAT
£13.21 incVAT

Trend Machinery Profile Scriber Ogee Set C149X1/4TC

D=41mm C=17mm B=22mm R=4mm Shank Diameter=1/4 inch
Click here for more information...

£32.34 exVAT
£37.19 incVAT

Trend Machinery Raised Panel 12mm Rad X 41mm Dia C150X1/4TC

For use in a router table only. |Take 3 - 4 passes at repeated depths.|Can be used for curved panels if a copy pin is used.
Click here for more information...

£29.79 exVAT
£34.26 incVAT

Trend Machinery Self G/Rebat 35mm Dia X 12.7mm Cut C040X1/4TC

This cutter is self-guiding & can be used to produce rebates, lap joints, tongues & rebated corners. |Alternative bearings can be purchased to vary the rebate.|9.5mm now included.|Larger bearings B22A & B25A can also be used. D=35mm C=12.7mm B=12.7mm E=11.
Click here for more information...

£16.60 exVAT
£19.09 incVAT

Trend Machinery Round/Over 6.3mm Rad X 12.7mm Cut C076X1/4TC

Self-guiding cutter for rounding over edges, without the need for a side fence.|If cutter is lowered, a top quirk can be produced.|Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. C=12.7mm B=12.7mm R=6.
Click here for more information...

£18.72 exVAT
£21.53 incVAT

Pages: (1) 2 3 4 5 6 …

Powertool Direct - Power Tools