Trend Drill Bits

Trend WP-SNAP/D/1MM Snappy 1mm drill only WP-SNAP/D/1MM

Trend Snappy 1mm Drill Only WP-SNAP/D/1m Replacement drill bit.
Click here for more information...

Trend WP-SNAP/D/564 Snappy 5/64 drill bit only WP-SNAP/D/564

Trend Snappy 5/64 Drill Bit Only WP-SNAP/D/56 Replacement drill bit.
Click here for more information...

Trend WP-SNAP/D332F Snappy drill bit 3/32 for Flip No 6 WP-SNAP/D332F

Trend Snappy Drill Bit 3/32 For Flip No 6 WP-SNAP/D332 Replacement drill for the Flip No6.
Click here for more information...

Trend WP-SNAP/DT/40 Snappy 4.0mm taper point drill Only WP-SNAP/DT/40

Trend Snappy 4.0mm Taper Point Drill Only WP-SNAP/DT/4 Replacement tapered point drill.
Click here for more information...

Trend WP-SNAP/D/4C Snappy counterbore 4X75mm drill bit only WP-SNAP/D/4C

Trend Snappy CB 4X75mm Drill Bit Only WP-SNAP/D/4C Spare drill for the Snappy Counterbore SNAP/CB/1TC.
Click here for more information...

Trend WP-SNAP/D/7L Snappy 7/64 drill long for DBG/7 WP-SNAP/D/7L

Trend Snappy 7/64 Drill Long For DBG/7 WP-SNAP/D/7L Spare HSS drill bit for the SNAP/DBG/7.
Click here for more information...

Trend WP-SNAP/D/63C Snappy counterbore 6.35X75mm drill bit only WP-SNAP/D/63C

Trend Snappy CB 6.35X75mm Drill Bit Only WP-SNAP/D/63 Spare drill for the Snappy Counterbores SNAP/CB/4TC & SNAP/CB/5TC.
Click here for more information...

Trend WP-SNAP/D63H Snappy HS arbor 14-152 drill 6.3X75 WP-SNAP/D63H

Trend Snappy Hs Arbor 14-152 Drill 6.3X75 WP-SNAP/D63H Replacement Snappy pilot drill bit.
Click here for more information...

Trend Snappy Flat Bit 22mm SNAP/FB/22

Trend Snappy Flat Bit 22mm SNAP/FB/22 An economical bit for cutting quick holes in timber.|With centre point, back tapered cutting edge and ground chip breakers.
Click here for more information...

Trend Snappy Flat Bit 25mm SNAP/FB/25

Trend Snappy Flat Bit 25mm SNAP/FB/25 An economical bit for cutting quick holes in timber.|With centre point, back tapered cutting edge and ground chip breakers.
Click here for more information...

Trend Snappy Forstner 25mm SNAP/FS/25

Trend Snappy Forstner 25mm SNAP/FS/25 High quality forged and ground carbon steel short Forstner bit for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Forstner 26mm SNAP/FS/26

Trend Snappy Forstner 26mm SNAP/FS/26 High quality forged and ground carbon steel short Forstner bit for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...

Trend Snappy Hole Saw 28.6mm (1- Deg) SNAP/HS/286

Trend Snappy Hole Saw 28.6mm (1- Deg) SNAP/HS/286 Diameter -
Click here for more information...

Trend Snappy Hole Saw Arbor (14-30) &Dril SNAP/HS/A1

Trend Snappy Hole Saw Arbor (14-30) &Dril SNAP/HS/A1 To take 14mm - 30mm diameter
Click here for more information...

Trend Snappy Taper Drill 3mm To 7mm SNAP/TD/1

Trend Snappy Taper Drill 3mm To 7mm SNAP/TD/1 For drilling and enlarging holes in all metals, plastics and timbers.
Click here for more information...

Trend Snappy Taper Drill 3mm To 14mm SNAP/TD/2

Trend Snappy Taper Drill 3mm To 14mm SNAP/TD/2 For drilling and enlarging holes in all metals, plastics and timbers.
Click here for more information...

Trend Snappy Tube Plug Cutter 9.5mm SNAP/PC/95T

Trend Snappy Tube Plug Cutter 9.5mm SNAP/PC/95T A direct drive shank tube type plug cutter with use with the Snappy Quick Chuck. The plug cutter creates a wooden plug or pellet to disguise screw heads.
Click here for more information...

Trend Snappy 3/32 Drill Bit Ten Pack SNAP/DB332/1

Trend Snappy 3/32 Drill Bit Ten Pack SNAP/DB332/1 Pack of 10 spare drills to suit the drill countersinks. Supplied in a storage tube.
Click here for more information...

Trend Snappy 7mm Drill And Adapter SNAP/D/7mm

Trend Snappy 7mm Drill And Adapter SNAP/D/7mm The HSS drill bit is gripped by a spring steel collet into the hex shaft.|The hex shanks snap into the Quick Chuck.
Click here for more information...

Trend Snappy Centring Guide 4.36mm Drill SNAP/DBG/12

Trend Snappy Centring Guide 4.36mm Drill SNAP/DBG/12 This sprung-loaded drill bit guide is self-centering.|Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment.|They can be easily dismantled for cleaning and are supplied with a HSS drill bit.
Click here for more information...