Trend Drilling Tools

Trend CB12-316HSS Counterbore 3/16 diameter x 1/2 DC/S CB12-316HSS

Trend CB12-316HSS Counterbore 3/16 diameter x 1/2 DC/S CB12-316HSS The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals.
Click here for more information...

Trend 6200/12HSS Adjustable countersink 5/8 inch diameter 6200/12HSS

Trend 6200/12HSS Adjustable countersink 5/8 inch diameter 6200/12HSS They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds only. Not suitable for ferrous or non ferrous metals.
Click here for more information...

Trend 4001/11HSS Dowel drill 11mm diameter x 87mm 4001/11HSS

Trend 4001/11HSS Dowel drill 11mm diameter x 87mm 4001/11HSS These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board.
Click here for more information...

Trend 1306/78WS Saw forstner 7/8 inch diameter 1306/78WS

Trend 1306/78WS Saw forstner 7/8 inch diameter 1306/78WS Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and acolloping operations.
Click here for more information...

Trend 2214/12WS Plug maker match 1/2 inch diameter 2214/12WS

Trend 2214/12WS Plug maker match 1/2 inch diameter 2214/12WS Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.|These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to bed of drilling machine.
Click here for more information...

Trend 620/5WS Countersink 5mm diameter 620/5WS

Trend 620/5WS Countersink 5mm diameter 620/5WS These countersinks, produced from the best grade carbon steel, leaves a clean cut finish by virtue of their multi-tooth deep ground gullets.|Fits metric drills from 3mm to 12mm inclusive.|Not suitable for abrasive materials or metal. Drill bit not included.
Click here for more information...

Trend 501/38HSS Twist drill 3/8 inch x 9.5mm diameter 501/38HSS

Trend 501/38HSS Twist drill 3/8 inch x 9.5mm diameter 501/38HSS Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work.
Click here for more information...

Trend CB34-14TC Counterbore 1/4 diameter x 3/4 DC/S CB34-14TC

Trend CB34-14TC Counterbore 1/4 diameter x 3/4 DC/S CB34-14TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only.
Click here for more information...

Trend 6200/20TC Adjustable countersink 1 inch diameter 6200/20TC

Trend 6200/20TC Adjustable countersink 1 inch diameter 6200/20TC They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only.
Click here for more information...

Trend Router Cutters Multi-Boring Dowel Drill 10mm Dia 4109/10

Trend Router Cutters Multi-Boring Dowel Drill 10mm Dia 4109/10LTC D=10mm C=25mm Overall length=57mm Shank Diameter=10mm
Click here for more information...

Trend 4001/10TC Dowel drill 10mm diameter x 85mm 4001/10TC

Trend 4001/10TC Dowel drill 10mm diameter x 85mm 4001/10TC These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board. Have tapered spurs.
Click here for more information...

Trend Router Cutters Drill 12mm Dia X 57mm Ol RH Pack 10 4109/12

Trend Router Cutters Drill 12mm Dia X 57mm Ol RH Pack 10 4109/12RTC/1 D=12mm C=25mm Overall length=57mm Shank Diameter=10mm
Click here for more information...

Trend Router Cutters Multi Borer 18mm Dia X 57mm Ol 1009/18

Trend Router Cutters Multi Borer 18mm Dia X 57mm Ol 1009/18RTC D=18mm OL=57mm Shank Diameter=10mm
Click here for more information...

Trend 1004/20TC Lip and spur two wing bit 20mm diameter 1004/20TC

Trend 1004/20TC Lip and spur two wing bit 20mm diameter 1004/20TC These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole.
Click here for more information...

Trend Router Cutters Multi-Bore Hinge Sink Bit 30mm Dia 1209/30

Trend Router Cutters Multi-Bore Hinge Sink Bit 30mm Dia 1209/30TC D=30mm OL=57mm Shank Diameter=10mm
Click here for more information...

Trend 1004/40TC Lip and spur two wing bit 40mm diameter 1004/40TC

Trend 1004/40TC Lip and spur two wing bit 40mm diameter 1004/40TC These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole.
Click here for more information...

Trend 501/1132TC Twist drill 11/32 diameter 501/1132TC

Trend 501/1132TC Twist drill 11/32 diameter 501/1132TC Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Have a Solid Carbide ends, brazed in and ground to give maximum clearance. Have a 60 degree taper point and are recommended for hard or abrasive materials.
Click here for more information...

Trend Machinery Rose C-Sink 12.5mm C-Sink Dia

This countersink is produced in HSS and should not be confused with carbon steel types.|Designed for countersinking mild steel, iron and plastics.| Five flute D=12.5 mm Overall length=40mm Shank Diameter=¼” inch
Click here for more information...

Trend 105/25X1/2TC Router machine bit 105/25X1/2TC

Trend 105/25X1/2TC Router machine bit 105/25X1/2TC These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used.
Click here for more information...

Trend 104/20X3/8TC Hinge sinking 20mm diameter 104/20X3/8TC

Trend 104/20X3/8TC Hinge sinking 20mm diameter 104/20X3/8TC These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes.|Use with pillar drills only.
Click here for more information...