Trend Router Cutter Range

Trend C130X1/4TC Corner bead 4.8mm radius C130X1/4TC

Trend C130X1/4TC Corner bead 4.8mm radius C130X1/4TC Attractive edge moulds. A full corner bead |can be produced by making a second pass at 90 degrees.
Click here for more information...

Trend 46/7/50X1/4TC Bearing guided glazing bar router cutter 46/7/50X1/4TC

Trend 46/7/50X1/4TC Bearing guided glazing bar router cutter 46/7/50X1/4TC The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.
Click here for more information...

Trend 346X1/2TC Intumescent router cutter set 346X1/2TC

Trend 346X1/2TC Intumescent router cutter set 346X1/2TC Cutter Set Ref. 346 is used for the grooving of door edges to receive 10mm intumescent strip. The arbor can be lowered or raised to give a wider groove for 20mm strip. Alternatively Ref. 345 can be used for 20mm strip.
Click here for more information...

Trend 3/2X1/2TC Two flute router cutter 6 mm diameter 3/2X1/2TC

Trend 3/2X1/2TC Two flute router cutter 6 mm diameter 3/2X1/2TC Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. |Two flutes give a clean finish to cut edges. |All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Trend General Title Diameters from 2.0mm to 12.
Click here for more information...

Trend C013X1/4TC Two flute router cutter 9.5mm diameter C013X1/4TC

Trend C013X1/4TC Two flute router cutter 9.5mm diameter C013X1/4TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Click here for more information...

Trend 3/55LX3/8HSS Pocket router cutter 9.5 mm diameter 3/55LX3/8HSS

Trend 3/55LX3/8HSS Pocket router cutter 9.5 mm diameter 3/55LX3/8HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 8/22X1/2TC Bearing guided sunk bead 8/22X1/2TC

Trend 8/22X1/2TC Bearing guided sunk bead 8/22X1/2TC Cutters with guide bearing reduce setting up time for curved workpieces. Trend General Title Bearing Guided Sunk Bead Specification For Trend 8/22X1/2TC Trend Router Cutter Shank Diameter 1/2 Inch Route Cutter Diameter 32.
Click here for more information...

Trend 46/09X1/2TC Profile router cutter 46/09X1/2TC

Trend 46/09X1/2TC Profile router cutter 46/09X1/2TC Profiler with shank mounted bearing guides.|For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimming. Refs.
Click here for more information...

Trend Router Cutters Thru Drill 10mm X 57mm olrh Pack Of 10 4507

D=12mm C=35mm Overall length=57mm Shank Diameter=10mm
Click here for more information...

Trend S48/42X1/4STC Economy flush and trim router cutter S48/42X1/4STC

Trend S48/42X1/4STC Economy flush and trim router cutter S48/42X1/4STC Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41. Ref. S48/42 is for trimming on a rebate. The guide length is 3mm. Ref. S48/39 is a shorter version of Ref. S48/40.
Click here for more information...

Trend 46/82X1/2TC Trimming router cutter 12.7 mm diameter 46/82X1/2TC

Trend 46/82X1/2TC Trimming router cutter 12.7 mm diameter 46/82X1/2TC Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Ref 46/82 has twin bearings for stability by increasing the bearing surface and is an industrial profiling tool for longer runs of work.
Click here for more information...

Trend 91/15X1/2TC Upstand router cutter 91/15X1/2TC

Trend 91/15X1/2TC Upstand router cutter 91/15X1/2TC Especially designed for routing Corian, which is used in many bathrooms and kitchens.
Click here for more information...

Trend Router Cutters Water Channel 18mm Dia 23/2X12

Primarily water channel cutter. |Also produces radiused rebates and grooves. Suitable for plunge cutting.
Click here for more information...

Trend RB/H Rota-Tip blade RB/H

Trend RB/H Rota-Tip blade RB/H Replacement Solid Carbide blades. |Supplied in a wallet.
Click here for more information...

Trend TR31X1/4TC Guided ovolo round over router cutter 6.35mm radius TR31X1/4TC

Trend TR31X1/4TC Guided ovolo round over router cutter 6.35mm radius TR31X1/4TC Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.|PTFE coated, indicated by distinctive black colouring.|Can be used on hardwood & softwood, fibreboard, plywood and particle board.
Click here for more information...

Trend TR24X1/4TC Guided trimmer 6.3mm diameter x 25.4 TR24X1/4TC

Trend TR24X1/4TC Guided trimmer 6.3mm diameter x 25.4 TR24X1/4TC For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.|PTFE coated, indicated by distinctive black colouring.
Click here for more information...

Trend TR15X1/2TC Two flute router cutter 12.7mm diameter TR15X1/2TC

Trend TR15X1/2TC Two flute router cutter 12.7mm diameter TR15X1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.|For housing, grooving and mortising.|Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
Click here for more information...

Trend 2/2LX1/4HSS Pocket router cutter 3.2 mm diameter 2/2LX1/4HSS

Trend 2/2LX1/4HSS Pocket router cutter 3.2 mm diameter 2/2LX1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend 4/08X1/4HSS Two flute router cutter 25.4 mm diameter 4/08X1/4HSS

Trend 4/08X1/4HSS Two flute router cutter 25.4 mm diameter 4/08X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Click here for more information...

Trend TR/KFP/3 Kitchen Fitters Pack TR17 x 5 pieces TR/KFP/3

Trend TR/KFP/3 Kitchen fitters pack TR17 x 5 Worktop Router Cutters TR/KFP/3 Five piece cutter pack aimed at kitchen fitters, ideal for worktops.
Click here for more information...