Special offers
Trend Snappy Auger Bit 19mm X 155mm       SNAP/AB/1

Trend Snappy Auger Bit 19mm X 155mm SNAP/AB/19


Trend Snappy Auger Bit 19mm X 155mm SNAP/AB/19 Made from Carbon steel and precision machined.|Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury.
Click here for more information...
£7.13 exVAT
£8.37 incVAT
Trend Snappy Auger Bit 20mm X 155mm       SNAP/AB/2

Trend Snappy Auger Bit 20mm X 155mm SNAP/AB/20


Trend Snappy Auger Bit 20mm X 155mm SNAP/AB/20 Made from Carbon steel and precision machined.|Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury.
Click here for more information...
£7.60 exVAT
£8.93 incVAT
Trend WP-SNAP/D/2MM Snappy 2mm drill only  WP-SNAP/D/2M

Trend WP-SNAP/D/2MM Snappy 2mm drill only WP-SNAP/D/2MM


Trend Snappy 2mm Drill Only WP-SNAP/D/2m Replacement drill bit.
Click here for more information...
£1.66 exVAT
£1.95 incVAT
Trend WP-SNAP/D/532 Snappy 5/32 drill bit only  WP-SNAP/D/53

Trend WP-SNAP/D/532 Snappy 5/32 drill bit only WP-SNAP/D/532


Trend Snappy 5/32 Drill Bit Only WP-SNAP/D/53 Replacement drill bit.
Click here for more information...
£1.19 exVAT
£1.40 incVAT
Trend WP-SNAP/D/7MM Snappy 7mm drill only  WP-SNAP/D/7M

Trend WP-SNAP/D/7MM Snappy 7mm drill only WP-SNAP/D/7MM


Trend Snappy 7mm Drill Only WP-SNAP/D/7m Replacement drill bit.
Click here for more information...
£2.38 exVAT
£2.79 incVAT
Trend Snappy Flat Bit 34mm                SNAP/FB/3

Trend Snappy Flat Bit 34mm SNAP/FB/34


Trend Snappy Flat Bit 34mm SNAP/FB/34 An economical bit for cutting quick holes in timber.|With centre point, back tapered cutting edge and ground chip breakers.
Click here for more information...
£4.51 exVAT
£5.30 incVAT
Trend Snappy Forstner 30mm                SNAP/FS/3

Trend Snappy Forstner 30mm SNAP/FS/30


Trend Snappy Forstner 30mm SNAP/FS/30 High quality forged and ground carbon steel short Forstner bit for drilling accurate holes.|For use with the Snappy Quick Chuck.|Will also drill overlapping holes.
Click here for more information...
£12.83 exVAT
£15.07 incVAT
Trend Snappy Hole Saw 32mm (1- Deg) B-Meta SNAP/HS/3

Trend Snappy Hole Saw 32mm (1- Deg) B-Meta SNAP/HS/32


Trend Snappy Hole Saw 32mm (1- Deg) B-Meta SNAP/HS/32 Diameter - 32mm
Click here for more information...
£4.26 exVAT
£5.00 incVAT
Trend Snappy Stub Auger 8mm X 105mm       SNAP/SA/

Trend Snappy Stub Auger 8mm X 105mm SNAP/SA/8


Trend Snappy Stub Auger 8mm X 105mm SNAP/SA/8 Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur.
Click here for more information...
£3.33 exVAT
£3.91 incVAT
Trend Snappy Tube Plug Cutter 8mm         SNAP/PC/8

Trend Snappy Tube Plug Cutter 8mm SNAP/PC/8T


Trend Snappy Tube Plug Cutter 8mm SNAP/PC/8T A direct drive shank tube type plug cutter with use with the Snappy Quick Chuck. The plug cutter creates a wooden plug or pellet to disguise screw heads.
Click here for more information...
£11.88 exVAT
£13.95 incVAT
Trend Snappy Machine Bit 15mm Dia T Cut     SNAP/Mb/15T

Trend Snappy Machine Bit 15mm Dia T Cut SNAP/Mb/15TC


Trend Snappy Machine Bit 15mm Dia T Cut SNAP/Mb/15TC The 15mm machine bit is designed to suit cam and dowel fixings. It is recommended that these bits are used in a drill stand.
Click here for more information...
£7.60 exVAT
£8.93 incVAT
Trend Snappy No 8 Four Piece Set          SNAP/NO8/SE

Trend Snappy No 8 Four Piece Set SNAP/NO8/SET


Trend Snappy No 8 Four Piece Set SNAP/NO8/SET This set incorporates one of each of the four main lines and is designed for No.8 screw size. Screw size=No.8 Quick chuck Drill countersink No.
Click here for more information...
£21.38 exVAT
£25.12 incVAT
Trend Snappy Nutdriver  Deg A/F Magneti

Trend Snappy Nutdriver Deg A/F Magnetic


Trend Snappy Nutdriver Deg A/F Magnetic Ideal for bolts.|Suitable for use with sheet metal screws.
Click here for more information...
£7.13 exVAT
£8.37 incVAT
Trend Snappy Tool Holder - 30 Piec

Trend Snappy Tool Holder - 30 Piece


Heavy duty fabric tool holder available with assorted Snappy tools. With elastic pockets to hold Snappy shanks. Supplied with a snappy pencil. Tool holders have a belt strap and are Velcro fastening.
Click here for more information...
£7.60 exVAT
£8.93 incVAT
Trend Snappy Countersink With 7/64 Drill  SNAP/CS/

Trend Snappy Countersink With 7/64 Drill SNAP/CS/8


Trend Snappy Countersink With 7/64 Drill SNAP/CS/8 Made of heat treated tool steel with hex shafts.|Fitted with High Speed Steel drill bit and is self clearing.|Adjustable for different screw lengths and will produce a 9.5 mm (?” inch) diameter counterbored hole to fit standard woodplugs. D=9.5mm d=2.75mm (7/64 inch) Screw size (S/W=No.
Click here for more information...
£4.28 exVAT
£5.02 incVAT
Trend Machinery Snap HeX Bit Ball End 7mm & 8mm A/F SNAP/HEX/

Trend Machinery Snap HeX Bit Ball End 7mm & 8mm A/F SNAP/HEX/C


Trend Machinery Snap HeX Bit Ball End 7mm & 8mm A/F SNAP/HEX/C Snappy shank 50mm long ball end hex bits. For use with both socket head cap and countersunk machine screws.
Click here for more information...
£8.55 exVAT
£10.05 incVAT
Trend Snappy Pozi No 2 Bit 150mm Ol       SNAP/PZ/2

Trend Snappy Pozi No 2 Bit 150mm Ol SNAP/PZ/2A


Trend Snappy Pozi No 2 Bit 150mm Ol SNAP/PZ/2A High grade tool steel bits, hardened for ultimate wear resistance.|The bits have ¼” inch hex shanks to fit the Quick Chuck.
Click here for more information...
£5.23 exVAT
£6.14 incVAT
Trend Snappy Quick Chuck Long 3           SNAP/QC

Trend Snappy Quick Chuck Long 3 SNAP/QC3


Trend Snappy Quick Chuck Long 3 SNAP/QC3 Overall length=3 inch Head diameter=(18mm)
Click here for more information...
£9.50 exVAT
£11.16 incVAT
Trend Snappy Flip Driver Set 5PCut         SNAP/Flip/S

Trend Snappy Flip Driver Set 5PCut SNAP/Flip/Se


Trend Snappy Flip Driver Set 5PCut SNAP/Flip/Se A four piece drill countersinking and screwdriving flip over set. Supplied with quick-change shank for fitting into Snappy Quick Chuck.|Drill length can be adjusted with 5/64Ó A/F hex key and is supplied with No 2 Pozi¨ drive insert bits.
Click here for more information...
£13.78 exVAT
£16.19 incVAT
Trend Snappy Tap M8 X 1.25mm HSS          SNAP/TAP/M

Trend Snappy Tap M8 X 1.25mm HSS SNAP/TAP/M8


Trend Snappy Tap M8 X 1.25mm HSS SNAP/TAP/M8 For use in torque control screwdrivers on metals and plastics.
Click here for more information...
£11.88 exVAT
£13.95 incVAT
Products: 308
Pages: (1) 2 3 4 5 6