Veritas Jig

Shelf Drilling Jig

Eliminates the time-consuming layout work associated with installing shelf supports. Set the jig's rails at the desired inset from the edge, fix them in position with the thumbscrews on the clamping rods, and then drill. Jig guarantees holes will be exactly opposite each other and at equally spaced intervals.
Click here for more information...

Pair Of Long Rods

Click here for more information...

37.5' Extra Long Rods - Pair

Click here for more information...

Hinge Boring Jig

Hand-held boring jig drills 35mm holes for cup hinges and outperforms a drill press or expensive machinery in speed and versatility. Precision-cast aluminum alloy frame incorporates a depth-adjustable carbide-tipped bit with outlining spurs for clean holes in solid wood, veneers, or melamine-covered material.
Click here for more information...

Replacement 35mm Carbide Bit

Click here for more information...

Dado Shim Set

Stacking a dado to get a perfect groove size requires shims. Most of us have used tape, paper, brass sheet, and other approximate systems that take a lot of fiddling around, including pulling off and replacing cutting blades and chippers. This set of shims makes all of this unnecessary.
Click here for more information...

Grinding Jig - Straight

Works with any power or hand grinder with a tool rest such as the Veritas Grinder Tool Rest 05M23.01. Square a tool in the jig against an alignment pin and clamping thumbscrew, adjust projection for bevel angle, and slide back and forth across the stone face to sharpen.
Click here for more information...

Skew Grinding Jig

This jig allows the grinding of a slight radius rather than a straight 20? skew to prevent digs when turning wood. Use with the Veritas Grinder Tool Rest 05M23.01 or on any grinder tool rest by drilling a 1/4' hole to hold the base pin. Grind radius is determined by tool projection.
Click here for more information...

Deluxe Veritas 32 Drilling Jig

Entire kitchen cabinets, entertainment systems, and furniture can be built in the European design with moderate skills, the Veritas 32 cabinetmaking system, and basic tools. With frameless construction (vs.
Click here for more information...

Dowelling Jig

Will do centered dowelling and will also dowel boards of different thicknesses to one reference face - the assembly is perfectly flat on one side with all thickness variations on the other (saves time planing and scraping).
Click here for more information...