WILLIAMS TORQUE WRENCH 3/8 SQ DR 10-50LB/FT SLIM

Slim Torque represent a selection of competitively priced fine precision torque wrenches manufactured in Britain. A forged ratchet with a push through 3/8in or 1/2in square drive for right of left hand threads.

The low friction torque mechanism is fully enclosed giving protection against ingress of dirt.

Calibration is in Pounds Force Feet and Newton Metres. An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Reset is automatic when hand pressure is relaxed.

Each torque wrench is guaranteed and conforms to BS.6703 and ISO 6789 standards.

When used in accordance with the manufacturers instructions the Williams Superslim torque wrench will give many years of highly accurate and reliable use.

The Slim Torque has two windows that display the calibrated scale one showing lbf.ft.,the other Nm. Finger tip adjustment of the end cap aligns the calibrated scale with the marker line in each window giving an accurate indication of torque loading. Each Slim Torque is individually tested before leaving the factory.

Reversible ratchet thread Silver powder coating

Square Drive - 3/8in lbt.ft 10 - 50 Nm 15 - 70 Overall Length 375mm / 14.3/4in Weight 900 Gramms