Woodworking From Proxxon

Proxxon FBS 240/E Precision Drill / Grinder FBS240/E

Proxxon FBS 240/E Precision Drill / Grinder FBS240/E The maximum speed of 20,000 rpm is continuously variable down to 5,000. The full wave electronic speed control results in virtually constant torque, even at lower speeds, great for micro drilling. The spindle runs in a precision ball bearing and is fitted with a lock button.
Click here for more information...

Proxxon IB/E Proffessional Drill / Grinder IB / E

Proxxon IB/E Proffessional Drill / Grinder IB / E High concentric accuracy (max. run out 3/100ths of a mm). This high revving, special motor has full-wave electronic speed control. The ground steel spindle runs in a ball bearing, so minimising play. 6 high concentricity collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm and locking nut).
Click here for more information...

Proxxon PD 230/E Dividing Attachment

Facilitates the machining of gear teeth and non-concentric patterns. Supplied with two dividing discs (40 and 48 steps), enabling standard divisions of 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 40 and 48. The spindle is identical to that of the lathe. The 3 and 4 jaw chuck may therefore be fitted to it as well (the chuck is an optional accessory).
Click here for more information...

Proxxon Micro Feed Attachment

Easily installed. The feed may now be used via either the height feed (vertical) or the fine feed in the tilted position. One revolution = 1.5 mm spindle travel, one division = 0.05 mm. The graduated scale may be reset to zero.
Click here for more information...

Proxxon Milling Cutter Set (6 - 10mm)

Consisits of cutters 6, 7, 8 and 10 mm diameter. Four flute, to DIN 844. HSS. Supplied in wooden box.
Click here for more information...

Proxxon Three Piece Centre Drill Set

HSS, DIN 333 (type A) 60?. Complete set with sizes of 2.0 - 2.5 and 3.15 mm.
Click here for more information...

Proxxon KGS80 Cut Off Mitre Saw KGS 80

Proxxon KGS80 Cut Off Mitre Saw For clean, safe cutting to length of NF metals, plastic and wood. This machine is ideal for mitre cuts: the round worktable with clamped work piece rotate, not the headstock! The laterally moving headstock (patent DP 103.18.479.1) eliminates any possibility of the blade and clamping system colliding.
Click here for more information...

Proxxon Chuck For TBM Drill Machine

For drill shank sizes 0.5 - 6.0 mm. Max. speed 10,000 rpm. Industrial quality with extra high speed accuracy. With 3/8' thread for MICROMOT bench drill TBM 220, including chuck key.
Click here for more information...

Proxxon Diamond Grinding Bits x 2 1.8mm

With consistently even coating of diamond dust. Shafts of 2.35 mm made of stainless steel. Used for grinding and engraving hard materials: steel (even chrome-cobalt alloy), glass, ceramics, porcelain, plastics.
Click here for more information...

Proxxon Silicon Carbide Wheels

Wheels for free-hand and stationary grinding of various metals and materials.
Click here for more information...

Proxxon Micromot 40 Mill/Drill Unit

Tested 100,000 times, these units speak for themselves. Here's why:The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design.
Click here for more information...

Proxxon Mof Micro Router Mof

Proxxon Mof Micro Router Mof Ideal for slotting, rounding over, counter boring, and stock removal in wood, plastic, Perspex, MDF, ceilings and many more. Supplied with six triple slit MICROMOT steel collets 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm and closure nut. Base and table made of die-cast alu.
Click here for more information...

Proxxon FMZ Precision Vice

Quickly and securely clamps to work benches and tabletops up to 60 mm thick. Stands freely or can be fixed down. Rotates in all directions, including flush to the surface. 75 mm jaws with removeable rubber covers. Zinc die-cast vice with ball and socket. Jaws also with vertical and horizontal V-slots. Max. clamping width 70 mm. Weight 1.6 kg.
Click here for more information...

Proxxon 48T TCT Saw Blade

80 mm diameter x 1.5 x 10 mm bore, 36 teeth.
Click here for more information...

Proxxon Carborundum Grinding Bits x 5

High quality bits and sets of quality base materials of consistent hardness. Various shapes for widest possible range of applications. For working especially hard materials such as cast iron, steel, as well as hard metal alloys. Accurately dimensioned shafts of 2.35 or 3.00 mm ensure maximum concentricity.
Click here for more information...

Proxxon 22mm Cut OFF Discs x 50

Reinforced discs made of aluminium-oxide. Diameter 38 mm, thickness 1.8 mm. Shatter-proof and thus suitable for scrubbing. 5 pieces with tool arbor. Shaft diameter 2.35 mm.
Click here for more information...

Proxxon Tungsten Vanadium Drill Bits 2.1mm

Purpose-made, selected, tungsten vanadium steel with high concentricity. Manufactured from a one-piece blank. High hardness for optimum life expectancy. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: hard materials approx. 3,000 rpm, soft materials approx. 8,000 rpm. All shanks 2.35 mm.
Click here for more information...

Proxxon Minimot-Steel Collets

Fits all MICROMOT machines, excluding the engraver GG 12. One of each 1.0 -1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm and locking nut are included.
Click here for more information...

Proxxon FlAP Wheels 20 x 10mm

Elastic and thus taking on the shape of the workpiece. Ideal for sanding in inaccessible spots. Shaft 3.0 mm.
Click here for more information...

Proxxon Router Bit Ovolo

Edge cutter with pin ? 5.0 mm - Made of molybdenum-chrome vanadium steel. Used in the manufacture of picture frames, for sloting, cutting radii and various profiles. Inverse relief ground for cleaner cuts. All shafts 3.2 mm.
Click here for more information...