Vices

Shoulder vice Screw

Used to build an L-shaped shoulder vise on a Scandinavian-style workbench. 1-1/8' diameter screw with single-lead Acme threads. Threaded guide mortises into the vise shoulder; end guide attaches to the vise jaw. 7-1/4' clamping capacity (less wooden shoulder thickness).13' long overall.Depending on supply, casting color may vary.
Click here for more information...

£24.71 exVAT
£29.03 incVAT

Tail vice

Used to build both types of tail vise, with or without a shoulder. Guide plates 2' wide by 15' long. Maximum opening 8' (less the thickness of your wooden jaws). 7/8' diameter Acme lead screw.Cast iron and steel components.Depending on supply, casting color may vary.
Click here for more information...

£52.06 exVAT
£61.17 incVAT

Tail vice Screw

Used to build a tail vise on a workbench. 1-1/8' diameter screw with single-lead Acme threads. Threaded guide mortises into bench skirt. 17' clamping capacity (less thickness of your wooden jaws).21-1/4' long overall.Cast iron and steel components.Depending on supply, casting color may vary.
Click here for more information...

£25.45 exVAT
£29.90 incVAT

Carvers Vice

Vise is adjustable in all three axes. Has full rotation in two axes and 3' of height adjustment in the third axis. Has controlled release by use of internal springs and O-rings so that workpieces will not suddenly fall or rotate. Vise may be bolted to a bench or clamped in a vise.
Click here for more information...

£77.21 exVAT
£90.72 incVAT

4 Way Speed Frame Clamp + Extension Set

Completely knurled speed-clamping nuts permit fast adjustments and hold securely when tightened. Cross-drilled nuts slide on clamp rods until they come up against a corner clamp; then their threads engage. Release by turning back the nut and then they are free sliding again.
Click here for more information...

£23.29 exVAT
£27.37 incVAT

Jewellers vice Post

One jaw has a horizontal V-notch and the other a vertical notch so that round parts can be securely held in either orientation by tightening the 1/2' brass knob. The 2-3/4' long by 1' diameter wooden handle allows a secure, comfortable grip, unlike the small handles that many similar vises have. Overall length 5-1/2', weighs only 2 oz.
Click here for more information...

£2.52 exVAT
£2.96 incVAT

Tucker Vice

The Tucker Vise features full rotation and tilt capability - the vise rotates 360? and tilts from horizontal to vertical and can be locked at any combination of points in the two planes. Front jaw can be swivelled 10? either way and locked (or left free floating) to hold tapered work.
Click here for more information...

£510.03 exVAT
£599.29 incVAT

Large Front vice

Used to build a front vise on a workbench. Machined double guide rods. Single-lead Acme screws. Regular front vise is 7' x 14-3/4' overall with a 7/8' dia. screw and a clamping capacity of 8-1/4' (less the thickness of your wooden jaws).
Click here for more information...

£60.97 exVAT
£71.64 incVAT

2' Mounting Plate Wth Rod

Click here for more information...

£9.60 exVAT
£11.28 incVAT

Regular Front Vice

Used to build a front vise on a workbench. Machined double guide rods. Single-lead Acme screws. Regular front vise is 7' x 14-3/4' overall with a 7/8' dia. screw and a clamping capacity of 8-1/4' (less the thickness of your wooden jaws).
Click here for more information...

£43.10 exVAT
£50.64 incVAT

Powertool Direct - Power Tools